Off Road Race Vehicles

2021 Brenthel - Championship TT $415k

ID# 181959Posted Nov 15
FEATURE LISTING
FOR SALE $415,000
2021 Brenthel Trophy Truck - Gen3

Off Road Race Vehicles-181959

Brenthel Trophy Truck

BITD - Championship Truck

RESULTS
3rd = Parker 425
2nd = Silver State 300
4th = Vegas to Reno
2nd = Laughlin
1st = Cal City

Will Entertain All Offers, Trades, Payments, etc.

This is our personal race truck with TONS and TONS of tuning and tweaking.

Prepped and Ready to Race

- Danzio P600 (650 total miles since last rebuild) 1,100hp
- Underdrive
- Alcon Brakes
- Carbon interior panels
- Billet Trailing arms
- Billet Uprights
- Passenger 12" GPS / Driver 7" GPS
- Life Display both sides
- HOWE Jacks

**We accept Crypto - BTC, ETH, XRP**

4 Wheel Independent Portal Ultra 4

ID# 181942Posted Nov 15
FEATURE LISTING
FOR SALE $120,000
 

Off Road Race Vehicles-181942

• Triton Engineering FIS Chassis
• Complete suspension, all 4130 and heat treated. This includes uprights, upper and lower arms, trailing arms, all uniballs, heims etc.
• Tubeworks Differentials front and rear. Front is a 1 way drive with air locker, rear is a full spool
• 74 Weld 2 Gear Race Portals – complete with all Gen 2 gears, hubs, etc. This includes 9310 gear sets, SKF bearings, 300M stubs. The front Portals run our 7075 billet aluminum uprights.
• Brakes - 28mm wide 345mm rotors, setup for R1 concepts 4 piston brakes (includes mounts but not calipers)
• PSS trophy truck rack, and servo. 7075 Billet rack adapter 7075 Tie rods
• Sparco Seats and seat mounts
• Fuel Safe custom 48 gallon fuel cell. Holly Hydromat across the whole bottom, Dual Aeromotive in tank A1000 pumps, and dual fill plates
• Designed for Chevy LS Motor and TH400 transmission
• Exterior aluminum panels
• Full set of aluminum skid plates
• Triton Race Coolers (Radiator, oil cooler, & transmission cooler. Mounted and ready with Spal fans
• 5 - 17” Forged Method wheels with 40” BFG KR3’s
• Custom Fox Shock package 3.0 Internal Bypass front, 3.5” 5 tube rear, 2.5 coilovers rear.
• Warn 9K comp winch

This car is a complete roller. Drop in drivetrain, plum and wire and she is ready to race!

Offering at $120,000 this is the perfect platform to start the ultimate play/race car.
Spares Package:
If purchased at the time of the car we can work out special pricing. I will offer 20% off all components we make when purchased w the car.

TRUGGY - CLASS 1

ID# 181944Posted Nov 15
PREMIUM LISTING
FOR SALE $90,000
2013  TDK

Off Road Race Vehicles-181944

Truggy Class 1 Off Road Racing
LS4 Camaro motor 400HD
King Shocks
New PCI Radios
New ECM wiring Harnass
Lots of new parts - call for list of all new parts and spare parts
Comes with helmets and Race Suits
Comes with a 3 Axle Enclosed Trailer

Call for more information 406-261-7631

Jimmy's Podium Bloodline - never raced and is in show condition

ID# 181938Posted Nov 15
FEATURE LISTING
FOR SALE $95,000
2015 jimmys (never raced, hardly used bloodline

Off Road Race Vehicles-181938

Jimmy’s 2 seat Podium Bloodline with new Bronco Body , 3 sets of Wheel & Tire configuration ( old body panels included
- LS3 motor
- spider trax axles
- atlas transfer case...
Freshly prepped and ready for use as race , recovery or pre runner Vehicle

$95,000.

BUILD SHEET FOR "CNC" BLOODLINE
$35,000 Step #.1-#2.-#3. 2-seat-Podium Bloodline Roller KIT
$35,000 Bloodline Roller KIT Podium series;
2.0 x .120 DOM ;
Main frame, Hood-line, all door bars, Belly, Lower front Frame rails, Roof over head "X"-ing, Top part of "X" in rear window, and outer rear belt line, "C" support to lower "B" Vertical support
1.75 x .120W DOM;
Lower rear frame, Inner Bed and rear shock support Vertical, front window down tubes, Vertical support tubes front window to front frame rails, Nose Verticals, winch fill and support tubes
1.5 x .120W DOM;
Front shock vertical support tubes, dual engine cross over tubes, Lower "B" support to belly (Seat "H" mounting), Seat tube
1" x .120W DOM;
Dash and center dash for floor layout
1.25x.120W DOM;
Engine Skid plate

Options Included;
Gen IV design
Turnkey Fill and Support tube Kit
This is all the fill and support tubes for shocks, seats, Gas tank, winch, etc
Bumpers
Single tube front Included
Single tube rear Included
"V" Doors

Mounts
Bloodline series Master Bracket kits-Standard Option's;
Tabs & Brackets- All Included in Standard kit
Motor mounts at center block, Head mount kit, Transmission adapter mount, Transfercase torque mount, Link mounts at chassis (.25 thick, for 3/4 bolt lower/upper), 1-piece steel Belly Base Mild steel, Hydraulic Valve Tab for under dash, Trans-shifter tabs, Resorvoir Tab, Seat Belt Tabs, Limit strap tabs, Tabs for all sheetmetal "Standard", Swaybar Double shear Tab's

Master Bracket Options and Add's;
#1.Belly
Steel belly 54"
$300 **Upgrade AR400
#2.link Mounts
Link mounts 1/4" for 1.25 lower and 3/4x7/8 upper
**Weld washer tabs
#3.Radiator Mounts/Cups or tray;
Front CBR
#4. Battery tray
Single Optima
#5. Motor mount
GM LS*/GEN III-IV Standard
#6. Transmission mount,
Atlas -Standard
#7. Transfercase Torque mount,
Atlas Standard
#8. Fuel Tray
16G
#9. Steering,
Standard
#10. Winch Mount,
Full drum,
Long Fairlead bracket
#12. Shock mounts,
Dual cross over tube Included in chassis
**Single shock
#13. SKID's
Engine Skid Plate with UHMW
#14, Accessories
Gusset Kit
Side Nerf Bars Pair (Includes Install Time) (skinny, Mid or wide)
Passenger Grab Handle w/grips
Tab Antenna
Engine head mount kit
Tow hooks each 4 corners
Add Attachment point for winch Tie Off point
**Add rear view Mirror
side mirrors
------------------------------------------------------------------------------------------
SUSPENSION Bracket kits;
4-link Standard Master Axle Bracket Kit-Large
Upper front link Towers Brackets w/weld washer Tab style, Bump stop landing pad's
Rear upper Towers for Jimmys Traditional mounting,
2-sets of lower link kits, Lower single shock tabs or dual, Weld washer tab style
----------------------------------------------------------------------------------------------
Body
Front Clips Included's HOOD PIN KIT
STANDARD 1-piece Universal hood-
Included HOOD PIN KIT
Rear Clips
STANDARD Rear Fenders Aluminum w/Aluminum rear
-----------------------------------------------------------------------------------------
BLOODLINE ROLLER FABRICATION
Turnkey Standard Master Fabrication
Chassis;
Place motor/trans/t-case (Includes weld in Motor mount and Transmission mount, place and weld Transfer case torque/support mount) weld belly and link mounts "Standard", weld in Fuel tray "Standard 16G", set and weld in winch mount, HYD steering mount "Standard", Radiator mount "Standrad", Seats and seat belts, Transmission shifter, Transmission cooler “Standard”, Power steering cooler "Standard", Place gauges, Mount Battery tray-single Firewall location, Power steering reservoir, Mounts for fuel pump and filters Standard, shock Reservoir mounts, Swaybar Double shear Tab's
all tabs to go Turnkey
INTERIOR;
All Floor work/Firewall work, Standard dash and center console, Fuel splash behind seats
EXTERIOR;
Front kickers, Doors, Roof Standard, Rear Aluminum fenders and Tail gate

Axles;
Place and weld in all Suspension link mounts, Place weld shock mounts "Standard", Mount front steering Ram, place limit strap tabs, place and weld in swaybar tabs

$4301 Step #.4 shocks
Shocks and Bumps
$1233 $616.50 X qty 2 FOX Factory Series Coilover w/res 2.5x14"
$1251 $625.50 x qty 2 FOX Factory Series Coilover w/res 2.5x16"
**w/DSC adjuster
$702 $175.50 x qty 4 FOX Factory Series Bump stop 2.0
$120 $30 x qty 4 FOX Factory Series Bump stop Mounting can
$600 Pac Springs 3.0 ID for 2.5 Coilover
$145 Shipping and Handling

$250 Limiting straps
set of 4, Includes quad straps, Tabs and Bolts, Fabrication to place and weld

$2,520 Step #.5 Suspension Parts
ROD END KITS W/SPACERS
$770 Large ROD END KIT
7/8 UPPER, 1.25 lower C-Molly Rod Ends, Stainless spacers and Washers
Link Material-Aluminum
$1,750 7075-Large LINKS

$1,906 STEP #6. Steering
Steering;
$1560 Steering – Dual Cylinder
PSC, full hyd kit, (TC/”P”) Pump, Steering VALVE (3.5 turns, other valves are available), COLUMN for Steering WHEEL), RESERVOIR (6” reservoir w/low pressure hoses), Hi-Pressure HOSES AND FITTINGS, DUAL 2.5 RAM, Small ENDS, END LINKS (Rod ends and dom tube),

$30 PSC steering wheel Disconnect splined
$88 Shipping and Handling

Steering accessories
STEERING WHEEL
$60 Lonacre 13" aluminum w/rubber grip
UPGRADE’s
$90 7075 Aluminum Steering Links, dual Ram
Step 5.B choice a cooler
Coolers
$78 Derale 18” log cooler
Includes 1.5 x .25 DOM tubing for steering ram

$1,400 Step #7. Fuel Hard Parts;
FUEL
$233 Fuel Cell– #260-116-NF Poly tank, No Foam
Jaz 16G race tank w/extra Injection fitting, NO FOAM
$78 shipping and Handling 16-22 Steel can tanks
$109 FAST FILL KIT
Fuel Pump Pick up kits;
$750 IN-TANK, Holley Hdra mat, 32G Alltech Baffle kit ($280)Hoses fittings and Install Labor
--------------------------------------------------
$230 Brake kit
wilwood dual master, 1” Bore , Fabricated Pedal (Longer ratio), qty (2) 2# residual Valves

$1,527 Step #7. Hard Parts & Accessories;
Seats
$700 PRP Premier with Drains and custom stitching
$95 SHIPPING
**PRP w/drain
--------------------------------------------------------
$232 seat belts
PRP w/sewn in shoulder pads, 5-point with rear loop, BITD/KOH certified
$500 Rear storage Kit;
Igloo 18G cooler 8gallon storage, bottom tray mounting kit and install with pin style strap

$3,392 Step #9. Mechanical and Accessories
$700 DRIVE LINES
1350 2.125 X .188W DOM, W/spicer SPLINES "Balanced"
$20 DRIVE LINES U-Bolt kits
(Qty 4, spicer 1350-1410 u-bolt kits
---------------------------------------------------------------------------------------------
$800 EXHAUST
dual, EXHAUST, CLAMPS, Dynomax BULLET MUFFLER
FABRICATION/INSTALL
---------------------------------------------------------------------------------------------
$850 Jimmy's Sway bar 1.125 Active, 35 Spline
---------------------------------------------------------------------------------------------
$900 WINCH
WARN M8000-s W/syn winch rope 100’ x 3/8
$122 Catch cans Race
1 quart Breather/ with filter; AN6 Inlet
1 pint mini breather w/filter, Dual Inlets 3/8 inlets,

$1,202 Step #10 Coolers & Accessories;
Front Mount;
$799 Radiator
CBR 31x14x2.25 dual pass w/ dual elec spal fans and mount, set for surge tank
$85 aluminum Brushed Surge tank/Overflow

Transmision**Suggest Dual pass
$250 Derale Pass aluminum Cooler
$68 S&H coolers

$2,296 Step #11. Wiring and Electrical
Step #11. Wiring and Electrical
Includes; Autometer Sport Comp 2/16, Coolant Temp, Oil Pressure, Volt
$950 Wiring supplies W/Head Lights (Does not include top light/s or Rock Lights, Please choose Head Lights )
Master kill switch, optima Red top, wire, connectors, switch’s ( ignition switch, fan Switch, Toggle for lights {head lights and Rock Lights) clamps, heat shrink, wire ties, relays, fuse block, battery cables, grounds, circuit breakers, fuses, extra wiring for head lights and rock lights etc…..
ADD Trans gauge $64
Add Tach 3 3/8
$100 ADD Tail light wiring and Lights
**Turn signal
Lights
$132 qty4 –led rock light strips round eyes (under car)

Mikes Import spot LED Light Bar
$150 2x2” Dually Head light pair
**KC dot square
$550 36” E Series FRNT or top light

$350 mounted in light bar Craddle (protect for roll over)

$0 Step #12. Race Kit Options
TBD

$8,500 STEP #13. Motors;
STEP #16. Motors;
JIMMY'S "NEW GM" KIT;
GM Assembled long block Motors, GM Intake, DBW T-Body, F-body pan, Front kit with Hi- Mount Alternator, no steering pump, GM DBW Engine wiring Harness with Computer, Air Filter, pre & post Fuel Filters, Fuel Pump, Headers, starter, all Hardware…….
LS3 430HP $8,500
$2950 STEP #14. Transmissions/Kit;
$2950 THM400 HD/Race “B” 203 Short shaft Deep Pan
Thm400 “K” case*, Drilled for ¼” vent w/Barb, Short NP 203 output shaft, Billet HD converter, pump modifications, Direct clutch Drum w/32 Element Sprag, OEM Stock FWD Drum, New OEM Deep Pan, All plastic washers Removed, Transgo shift Kit or TG Full manual kit FWD shift kit, Winters rev FM No Comp-Breaking, locking dipstick, AN Fittings at case, and Gate Shifter

$2985 STEP #15. Transfercase; No speedo, Regular yokes
$2650 Atlas II with 32 spline front output
$225 Atlas Thm 350-400 adapter
$110 Shipping on Transfercases

$1,589 STEP #16. Plumbing Kit;
Base; just enough to do a base car, no Oil cooler, no Accumulator, no brake switch or line locks, no cutting brakes
Standard Race; Has enough to do a base car, but also will have a Oil cooler, and a oil Accumulator, with brake switch and a line locks, still no cutting brakes
**This price includes Fittings and ends for running brake lights and line lock, but does not include the fittings, Check valve for a Oil Cooler/accumulator, when Running this Items you will have more 30, 45,60, 90, 120, 150, and 180 Degree Fittings which cost more.
They are priced in the engine section..
Pure race; is the same as a Stanard race but is with Twsit Lock instead of puch lock
$1268 Standard Race PLUMBING KIT— 8600 Push Lock, Race kit KOH certified
AN fittings, series 8600 hose
ALL HOSES AND FITTINGS FOR;
BRAKES;
MASTER CYLINDER to Calipers, Cutting Brakes
FUEL-
INTAKE-REGULATOR-RETURN, VENT W/FILTER ,
Fuel length vent line to Catch can, over flow, or cap
3Add pressure port for rear Brake Light and Valve for Line Lock/Parking brake (KOH)
SHUT OFF VALVES (3 required for Hammer King rules)
ADD Fragola Billet
Radiator Plumbing kit;
-16 push lock and 8600 hose (Radiators must have AN fittings and Motor also)
$225 Rear Radiator w/Front mount engine (series 1-2 and 3)

$19,324 set/pair 2014 sheet
$11,742 Standard Mild steel Ultimate SPIDER 9 Front
Axle Housings & Knuckles
(Hi-9 and Driver Drop suggested for Front axles)
FRONT 3.5 OD x .25 Housing
3.5 x .25, ULTIMATE 60 KNUCKLE KIT, Ultimate1-TON UNIT BEARING, 5-6 LUG with 1/2 studs, Housing is cut and Knuckles are placed and welded,
Tube Seals
Tube seal ¼ tube and 3/8 Tube, Pair, single seal in each Housing
14” Brake kits for Spidertrax Knuckles
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
4-piston kit
DROP OUT”S (Third Members)
(All carriers priced w/35spline and full steel spools, Solid spacer and 1350 forged yoke)
TRUE HI 9
Standard Hi 9
HARD PARTS
Steering arms for Spidertrax Knuckles
SPIDERTRAX STEERING ARMS BOLT ON
Axle Shafts (Includes S&H and assembly)
SPIDERTRAX 4340 axle shaft kit w/Yukon super U-Joints
Assembly Labor
Install all Drop outs shafts and install/Bolt on Knuckles and wheel hubs

ALL OPTIONS;
Unit Bearing and Knuckle options
$500-option Add Pro series Knuckles to Standard 3.5” Housing
$22-option ADD Extra axle seal, pair, to Double up in seal housing
14” Brake Options
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
DROP OUT”S (Third Members) Options
(All carriers priced w/35spline and full steel spools, Solid spacer and 1350 forged yoke)
10” Gear works Housing Low Pinion,
$1300-Option ADD Gear works HI-10” gears, GW or MW spool 35-40 spline
LOCKER CHANGES
$730-option ADD SPOOL TO ARB 35 spline only
HARD PARTS
Steering arms for Spidertrax Knuckles
$250-option JIMMYS WELD ON STEERING ARMS, Double shear

Axle Shafts (Includes S&H and assembly)
$500-option SPIDERTRAX 300M axle shaft kit w/Yukon super U-Joints

=================================================
$7,582 SPIDER 9 REAR
HOUSINGS
REAR 3.5” OD X .25 HOUSING
3” X .375 or 3.5” X .25 HOUSING, 1 Ton Full Floater End Cup’s, Ultimate 1-TON UNIT BEARING, 5-6 LUG with 1/2 studs, Housing is cut and End Cup’s are placed and welded,
Tube Seals
Tube seal ¼ tube and 3/8 Tube, Pair, single seal in each Housing
14” Brake kits for Spidertrax Unit bearings and end cups
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
4-piston kit
AXLE SHAFTS FULL FLOAT
SPIDERTRAX 4340 axle shaft kit
Yukon “N” Iron housing 3.25, iron pinion support, Detroit, 28
Assembly Labor
Install all Drop outs shafts and install/Bolt on Knuckles and wheel hubs


ALL OPTIONS;
Unit Bearing options
$22-option ADD Extra axle seal, pair, to Double up in seal housing
14” Brake Options
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
DROP OUT”S (Third Members) Options
(All carriers priced w/35spline and full steel spools, Solid spacer and 1350 forged yoke)
10” Gear works Housing Low Pinion,
$1300-Option ADD Gear works HI-10” gears, GW or MW spool 35-40 spline
LOCKER CHANGES
$730-option ADD SPOOL TO ARB 35 spline only

HARD PARTS
Axle Shafts (Includes S&H and assembly)
$300-option ADD SPIDERTRAX 300M axle shaft kit

$3,468 Step #18. Wheels and Tires
Wheels & Tires
$2100 BFG Red 39" Krawler set of 4
$1320 Fuel Beadlock set of 4
---------------------------------------------------------------------------------
Lug nut kits
$48 Lug nut kits standard 6-lug acorn open 5/8

$13,585 Step #19B. Turnkey Finishing work;
All Projects are Built With set up parts. During the building process cars will be tore down and put back together numerous amounts of times.
Our goal is to keep your new parts as new looking as Possible through the build process.
We try to use as many “Mok up” parts and supplies as possible.
We use bolts w/Non locking nuts, No washers, they are not used in the build process so at the time of “Final assembly” the Bolts and nuts used on the project will retain there true locking function.
All Builds, from a roller to a full turnkey are tore down for final welding of Chassis and Mounts, there is no charge to pick up Chassis and Parts Un-assembled.
If you would like your “Build” in a Roller or if you are going full Turnkey, please pick on of the following Mechanical charges)
Base Builds;
Turnkeys that are Raw or spray painted, Base parts. No extra coolers w/ fans on accessories, base gauges, and Basic Plumbing. no lights
Standard Builds;
Standard builds are Projects that will get tore completely down and Transported for Powder coating of chassis and Mounts. Most usually will have a 8x10 Trans Cooler with electric fan and a log style steering cooler, no Oil coolers, No Accumulator’s, no race accessories or Communication’s, minor lights, etc…
expert extra accessories time to time
RACE Builds;
RACE builds are Projects that are fully loaded, extra cooling, Item's to pass race Tech, larger fuel tank's, remote fill, full light packages, race accessories and Communication’s along with GPS and Air pumper
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
PURE-RACE Build Turnkey w/Full Lights --Powder chassis
Includes, Installing All Hard Parts; Mounting all standard Base Build parts, Standrad and Race items. accessories
$10,000-+ Turnkey Package’s Non Paint
**Mechaical can change with Add's
------------------------------------------------------------------------------------------
**Paint and powder coat Prices are not Exact but Average cost of out last 10 Builds** For Estimate Only
$1785 Powder Coat
Chassis, small parts (radiator mounts, engine mounts, trans-mount, all clamps and Brackets, window net hardware) axle housings/Knuckles/diff cover

$1800 Body Paint/PC
Paint outer body hood, cowl, fenders and grille, Powder coat all interior panels

$2,800 STEP #20. Supplies
Bolt kit's, Grade 8, Nylon or steel lock nuts
$750 Bolt kit, Turnkey/Race
--------------------------------------------------------------------------------------------
$550 Fluids/Race
Antifreeze w/Distilled water, Wilwood Brake Fluid 600+, GM Steering Fluid, MAG-1 Transmission fluid Type-F, MOBIL-1 Engine oil, REDLINE 2 Jimmy’s 2 seat Podium Bloodline

BUILD SHEET FOR "CNC" BLOODLINE
$35,000 Step #.1-#2.-#3. 2-seat-Podium Bloodline Roller KIT
$35,000 Bloodline Roller KIT Podium series;
2.0 x .120 DOM ;
Main frame, Hood-line, all door bars, Belly, Lower front Frame rails, Roof over head "X"-ing, Top part of "X" in rear window, and outer rear belt line, "C" support to lower "B" Vertical support
1.75 x .120W DOM;
Lower rear frame, Inner Bed and rear shock support Vertical, front window down tubes, Vertical support tubes front window to front frame rails, Nose Verticals, winch fill and support tubes
1.5 x .120W DOM;
Front shock vertical support tubes, dual engine cross over tubes, Lower "B" support to belly (Seat "H" mounting), Seat tube
1" x .120W DOM;
Dash and center dash for floor layout
1.25x.120W DOM;
Engine Skid plate

Options Included;
Gen IV design
Turnkey Fill and Support tube Kit
This is all the fill and support tubes for shocks, seats, Gas tank, winch, etc
Bumpers
Single tube front Included
Single tube rear Included
"V" Doors

Mounts
Bloodline series Master Bracket kits-Standard Option's;
Tabs & Brackets- All Included in Standard kit
Motor mounts at center block, Head mount kit, Transmission adapter mount, Transfer case torque mount, Link mounts at chassis (.25 thick, for 3/4 bolt lower/upper), 1-piece steel Belly Base Mild steel, Hydraulic Valve Tab for under dash, Trans-shifter tabs, Reservoir Tab, Seat Belt Tabs, Limit strap tabs, Tabs for all sheet metal "Standard", Swaybar Double shear Tab's

Master Bracket Options and Add's;
#1.Belly
Steel belly 54"
$300 **Upgrade AR400
#2.link Mounts
Link mounts 1/4" for 1.25 lower and 3/4x7/8 upper
**Weld washer tabs
#3.Radiator Mounts/Cups or tray;
Front CBR
#4. Battery tray
Single Optima
#5. Motor mount
GM LS*/GEN III-IV Standard
#6. Transmission mount,
Atlas -Standard
#7. Transfercase Torque mount,
Atlas Standard
#8. Fuel Tray
16G
#9. Steering,
Standard
#10. Winch Mount,
Full drum,
Long Fairlead bracket
#12. Shock mounts,
Dual cross over tube Included in chassis
**Single shock
#13. SKID's
Engine Skid Plate with UHMW
#14, Accessories
Gusset Kit
Side Nerf Bars Pair (Includes Install Time) (skinny, Mid or wide)
Passenger Grab Handle w/grips
Tab Antenna
Engine head mount kit
Tow hooks each 4 corners
Add Attachment point for winch Tie Off point
**Add rear view Mirror
side mirrors
------------------------------------------------------------------------------------------
SUSPENSION Bracket kits;
4-link Standard Master Axle Bracket Kit-Large
Upper front link Towers Brackets w/weld washer Tab style, Bump stop landing pad's
Rear upper Towers for Jimmys Traditional mounting,
2-sets of lower link kits, Lower single shock tabs or dual, Weld washer tab style
----------------------------------------------------------------------------------------------
Body
Front Clips Included's HOOD PIN KIT
STANDARD 1-piece Universal hood-
Included HOOD PIN KIT
Rear Clips
STANDARD Rear Fenders Aluminum w/Aluminum rear
-----------------------------------------------------------------------------------------
BLOODLINE ROLLER FABRICATION
Turnkey Standard Master Fabrication
Chassis;
Place motor/trans/t-case (Includes weld in Motor mount and Transmission mount, place and weld Transfer case torque/support mount) weld belly and link mounts "Standard", weld in Fuel tray "Standard 16G", set and weld in winch mount, HYD steering mount "Standard", Radiator mount "Standrad", Seats and seat belts, Transmission shifter, Transmission cooler “Standard”, Power steering cooler "Standard", Place gauges, Mount Battery tray-single Firewall location, Power steering reservoir, Mounts for fuel pump and filters Standard, shock Reservoir mounts, Swaybar Double shear Tab's
all tabs to go Turnkey
INTERIOR;
All Floor work/Firewall work, Standard dash and center console, Fuel splash behind seats
EXTERIOR;
Front kickers, Doors, Roof Standard, Rear Aluminum fenders and Tail gate

Axles;
Place and weld in all Suspension link mounts, Place weld shock mounts "Standard", Mount front steering Ram, place limit strap tabs, place and weld in swaybar tabs

$4301 Step #.4 shocks
Shocks and Bumps
$1233 $616.50 X qty 2 FOX Factory Series Coilover w/res 2.5x14"
$1251 $625.50 x qty 2 FOX Factory Series Coilover w/res 2.5x16"
**w/DSC adjuster
$702 $175.50 x qty 4 FOX Factory Series Bump stop 2.0
$120 $30 x qty 4 FOX Factory Series Bump stop Mounting can
$600 Pac Springs 3.0 ID for 2.5 Coilover
$145 Shipping and Handling
$250 Limiting straps
set of 4, Includes quad straps, Tabs and Bolts, Fabrication to place and weld

$2,520 Step #.5 Suspension Parts
ROD END KITS W/SPACERS
$770 Large ROD END KIT
7/8 UPPER, 1.25 lower C-Molly Rod Ends, Stainless spacers and Washers
Link Material-Aluminum
$1,750 7075-Large LINKS

$1,906 STEP #6. Steering
Steering;
$1560 Steering – Dual Cylinder
PSC, full hyd kit, (TC/”P”) Pump, Steering VALVE (3.5 turns, other valves are available), COLUMN for Steering WHEEL), RESERVOIR (6” reservoir w/low pressure hoses), Hi-Pressure HOSES AND FITTINGS, DUAL 2.5 RAM, Small ENDS, END LINKS (Rod ends and dom tube),

$30 PSC steering wheel Disconnect splined
$88 Shipping and Handling

Steering accessories
STEERING WHEEL
$60 Lonacre 13" aluminum w/rubber grip
UPGRADE’s
$90 7075 Aluminum Steering Links, dual Ram
Step 5.B choice a cooler
Coolers
$78 Derale 18” log cooler
Includes 1.5 x .25 DOM tubing for steering ram

$1,400 Step #7. Fuel Hard Parts;
FUEL
$233 Fuel Cell– #260-116-NF Poly tank, No Foam
Jaz 16G race tank w/extra Injection fitting, NO FOAM
$78 shipping and Handling 16-22 Steel can tanks
$109 FAST FILL KIT
Fuel Pump Pick up kits;
$750 IN-TANK, Holley Hdra mat, 32G Alltech Baffle kit ($280)Hoses fittings and Install Labor
--------------------------------------------------
$230 Brake kit
wilwood dual master, 1” Bore , Fabricated Pedal (Longer ratio), qty (2) 2# residual Valves

$1,527 Step #7. Hard Parts & Accessories;
Seats
$700 PRP Premier with Drains and custom stitching
$95 SHIPPING
**PRP w/drain
--------------------------------------------------------
$232 seat belts
PRP w/sewn in shoulder pads, 5-point with rear loop, BITD/KOH certified
$500 Rear storage Kit;
Igloo 18G cooler 8gallon storage, bottom tray mounting kit and install with pin style strap

$3,392 Step #9. Mechanical and Accessories
$700 DRIVE LINES
1350 2.125 X .188W DOM, W/spicer SPLINES "Balanced"
$20 DRIVE LINES U-Bolt kits
(Qty 4, spicer 1350-1410 u-bolt kits
---------------------------------------------------------------------------------------------
$800 EXHAUST
dual, EXHAUST, CLAMPS, Dynomax BULLET MUFFLER
FABRICATION/INSTALL
---------------------------------------------------------------------------------------------
$850 Jimmy's Sway bar 1.125 Active, 35 Spline
---------------------------------------------------------------------------------------------
$900 WINCH
WARN M8000-s W/syn winch rope 100’ x 3/8
$122 Catch cans Race
1 quart Breather/ with filter; AN6 Inlet
1 pint mini breather w/filter, Dual Inlets 3/8 inlets,
$1,202 Step #10 Coolers & Accessories;
Front Mount;
$799 Radiator
CBR 31x14x2.25 dual pass w/ dual elec spal fans and mount, set for surge tank
$85 aluminum Brushed Surge tank/Overflow
Transmision**Suggest Dual pass
$250 Derale Pass aluminum Cooler
$68 S&H coolers
$2,296 Step #11. Wiring and Electrical
Step #11. Wiring and Electrical
Includes; Autometer Sport Comp 2/16, Coolant Temp, Oil Pressure, Volt
$950 Wiring supplies W/Head Lights (Does not include top light/s or Rock Lights, Please choose Head Lights )
Master kill switch, optima Red top, wire, connectors, switch’s ( ignition switch, fan Switch, Toggle for lights {head lights and Rock Lights) clamps, heat shrink, wire ties, relays, fuse block, battery cables, grounds, circuit breakers, fuses, extra wiring for head lights and rock lights etc…..
ADD Trans gauge $64
Add Tach 3 3/8
$100 ADD Tail light wiring and Lights
**Turn signal
Lights
$132 qty4 –led rock light strips round eyes (under car)

Mikes Import spot LED Light Bar
$150 2x2” Dually Head light pair
**KC dot square
$550 36” E Series FRNT or top light
$350 mounted in light bar Craddle (protect for roll over)
$0 Step #12. Race Kit Options
TBD
$8,500 STEP #13. Motors;
STEP #16. Motors;
JIMMY'S "NEW GM" KIT;
GM Assembled long block Motors, GM Intake, DBW T-Body, F-body pan, Front kit with Hi- Mount Alternator, no steering pump, GM DBW Engine wiring Harness with Computer, Air Filter, pre & post Fuel Filters, Fuel Pump, Headers, starter, all Hardware…….
LS3 430HP $8,500
$2950 STEP #14. Transmissions/Kit;
$2950 THM400 HD/Race “B” 203 Short shaft Deep Pan
Thm400 “K” case*, Drilled for ¼” vent w/Barb, Short NP 203 output shaft, Billet HD converter, pump modifications, Direct clutch Drum w/32 Element Sprag, OEM Stock FWD Drum, New OEM Deep Pan, All plastic washers Removed, Transgo shift Kit or TG Full manual kit FWD shift kit, Winters rev FM No Comp-Breaking, locking dipstick, AN Fittings at case, and Gate Shifter
$2985 STEP #15. Transfercase; No speedo, Regular yokes
$2650 Atlas II with 32 spline front output
$225 Atlas Thm 350-400 adapter
$110 Shipping on Transfercases

$1,589 STEP #16. Plumbing Kit;
Base; just enough to do a base car, no Oil cooler, no Accumulator, no brake switch or line locks, no cutting brakes
Standard Race; Has enough to do a base car, but also will have a Oil cooler, and a oil Accumulator, with brake switch and a line locks, still no cutting brakes
**This price includes Fittings and ends for running brake lights and line lock, but does not include the fittings, Check valve for a Oil Cooler/accumulator, when Running this Items you will have more 30, 45,60, 90, 120, 150, and 180 Degree Fittings which cost more.
They are priced in the engine section..
Pure race; is the same as a Stanard race but is with Twsit Lock instead of puch lock
$1268 Standard Race PLUMBING KIT— 8600 Push Lock, Race kit KOH certified
AN fittings, series 8600 hose
ALL HOSES AND FITTINGS FOR;
BRAKES;
MASTER CYLINDER to Calipers, Cutting Brakes
FUEL-
INTAKE-REGULATOR-RETURN, VENT W/FILTER ,
Fuel length vent line to Catch can, over flow, or cap
3Add pressure port for rear Brake Light and Valve for Line Lock/Parking brake (KOH)
SHUT OFF VALVES (3 required for Hammer King rules)
ADD Fragola Billet
Radiator Plumbing kit;
-16 push lock and 8600 hose (Radiators must have AN fittings and Motor also)
$225 Rear Radiator w/Front mount engine (series 1-2 and 3)
$19,324 set/pair 2014 sheet
$11,742 Standard Mild steel Ultimate SPIDER 9 Front
Axle Housings & Knuckles
(Hi-9 and Driver Drop suggested for Front axles)
FRONT 3.5 OD x .25 Housing
3.5 x .25, ULTIMATE 60 KNUCKLE KIT, Ultimate1-TON UNIT BEARING, 5-6 LUG with 1/2 studs, Housing is cut and Knuckles are placed and welded,
Tube Seals
Tube seal ¼ tube and 3/8 Tube, Pair, single seal in each Housing
14” Brake kits for Spidertrax Knuckles
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
4-piston kit
DROP OUT”S (Third Members)
(All carriers priced w/35spline and full steel spools, Solid spacer and 1350 forged yoke)
TRUE HI 9
Standard Hi 9
HARD PARTS
Steering arms for Spidertrax Knuckles
SPIDERTRAX STEERING ARMS BOLT ON
Axle Shafts (Includes S&H and assembly)
SPIDERTRAX 4340 axle shaft kit w/Yukon super U-Joints
Assembly Labor
Install all Drop outs shafts and install/Bolt on Knuckles and wheel hubs
ALL OPTIONS;
Unit Bearing and Knuckle options
$500-option Add Pro series Knuckles to Standard 3.5” Housing
$22-option ADD Extra axle seal, pair, to Double up in seal housing
14” Brake Options
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
DROP OUT”S (Third Members) Options
(All carriers priced w/35spline and full steel spools, Solid spacer and 1350 forged yoke)
10” Gear works Housing Low Pinion,
$1300-Option ADD Gear works HI-10” gears, GW or MW spool 35-40 spline
LOCKER CHANGES
$730-option ADD SPOOL TO ARB 35 spline only
HARD PARTS
Steering arms for Spidertrax Knuckles
$250-option JIMMYS WELD ON STEERING ARMS, Double shear
Axle Shafts (Includes S&H and assembly)
$500-option SPIDERTRAX 300M axle shaft kit w/Yukon super U-Joints
=================================================
$7,582 SPIDER 9 REAR
HOUSINGS
REAR 3.5” OD X .25 HOUSING
3” X .375 or 3.5” X .25 HOUSING, 1 Ton Full Floater End Cup’s, Ultimate 1-TON UNIT BEARING, 5-6 LUG with 1/2 studs, Housing is cut and End Cup’s are placed and welded,
Tube Seals
Tube seal ¼ tube and 3/8 Tube, Pair, single seal in each Housing
14” Brake kits for Spidertrax Unit bearings and end cups
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
4-piston kit
AXLE SHAFTS FULL FLOAT
SPIDERTRAX 4340 axle shaft kit
Yukon “N” Iron housing 3.25, iron pinion support, Detroit, 28
Assembly Labor
Install all Drop outs shafts and install/Bolt on Knuckles and wheel hubs
ALL OPTIONS;
Unit Bearing options
$22-option ADD Extra axle seal, pair, to Double up in seal housing
14” Brake Options
(qty 2 Hats, qty 2 Rotors, qty 2 wildwood Caliper 4 or 6 piston, pair wildwood poly matrix pads, and pair Caliper mounts)
DROP OUT”S (Third Members) Options
(All carriers priced w/35spline and full steel spools, Solid spacer and 1350 forged yoke)
10” Gear works Housing Low Pinion,
$1300-Option ADD Gear works HI-10” gears, GW or MW spool 35-40 spline
LOCKER CHANGES
$730-option ADD SPOOL TO ARB 35 spline only

HARD PARTS
Axle Shafts (Includes S&H and assembly)
$300-option ADD SPIDERTRAX 300M axle shaft kit

$3,468 Step #18. Wheels and Tires
Wheels & Tires
$2100 BFG Red 39" Krawler set of 4
$1320 Fuel Beadlock set of 4
---------------------------------------------------------------------------------
Lug nut kits
$48 Lug nut kits standard 6-lug acorn open 5/8

$13,585 Step #19B. Turnkey Finishing work;
All Projects are Built With set up parts. During the building process cars will be tore down and put back together numerous amounts of times.
Our goal is to keep your new parts as new looking as Possible through the build process.
We try to use as many “Mok up” parts and supplies as possible.
We use bolts w/Non locking nuts, No washers, they are not used in the build process so at the time of “Final assembly” the Bolts and nuts used on the project will retain there true locking function.
All Builds, from a roller to a full turnkey are tore down for final welding of Chassis and Mounts, there is no charge to pick up Chassis and Parts Un-assembled.
If you would like your “Build” in a Roller or if you are going full Turnkey, please pick on of the following Mechanical charges)
Base Builds;
Turnkeys that are Raw or spray painted, Base parts. No extra coolers w/ fans on accessories, base gauges, and Basic Plumbing. no lights
Standard Builds;
Standard builds are Projects that will get tore completely down and Transported for Powder coating of chassis and Mounts. Most usually will have a 8x10 Trans Cooler with electric fan and a log style steering cooler, no Oil coolers, No Accumulator’s, no race accessories or Communication’s, minor lights, etc…
expert extra accessories time to time
RACE Builds;
RACE builds are Projects that are fully loaded, extra cooling, Item's to pass race Tech, larger fuel tank's, remote fill, full light packages, race accessories and Communication’s along with GPS and Air pumper
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
PURE-RACE Build Turnkey w/Full Lights --Powder chassis
Includes, Installing All Hard Parts; Mounting all standard Base Build parts, Standrad and Race items. accessories
$10,000-+ Turnkey Package’s Non Paint
**Mechaical can change with Add's
------------------------------------------------------------------------------------------
**Paint and powder coat Prices are not Exact but Average cost of out last 10 Builds** For Estimate Only
$1785 Powder Coat
Chassis, small parts (radiator mounts, engine mounts, trans-mount, all clamps and Brackets, window net hardware) axle housings/Knuckles/diff cover

$1800 Body Paint/PC
Paint outer body hood, cowl, fenders and grille, Powder coat all interior panels

$2,800 STEP #20. Supplies
Bolt kit's, Grade 8, Nylon or steel lock nuts
$750 Bolt kit, Turnkey/Race
--------------------------------------------------------------------------------------------
$550 Fluids/Race
Antifreeze w/Distilled water, Wilwood Brake Fluid 600+, GM Steering Fluid, MAG-1 Transmission fluid Type-F, MOBIL-1 Engine oil, REDLINE 250-Shock prof Gear Lube for both Differentials

Supplies;
Welding supplies, Grinding discs, Helmet lenses, Rags, Lubes and Cleaners, waste disposal, ETC
$1500 Turnkey/Race

$138,

50-Shock prof Gear Lube for both Differentials

Supplies;
Welding supplies, Grinding discs, Helmet lenses, Rags, Lubes and Cleaners, waste disposal, ETC
$1500 Turnkey/Race

$138,745.

Call Bob De Lozier
C: 909-478-4791

Class 10

ID# 179860Posted Nov 15
PREMIUM LISTING
FOR SALE $6,900
RCD Single seat

Off Road Race Vehicles-179860

RCD class 10 single seat chassis. Includes seat, some wiring,front spindles,front trailing arms, rear trailing arms, rear cage , nets and misc parts.
New body

Pro/Super Buggy - Mid Engine

ID# 178005Posted Nov 13
PREMIUM LISTING
FOR SALE $22,000
VDE Pro Buggy

Off Road Race Vehicles-178005

Selling my Championship Off Road Pro Buggy
-Podium car!
-Mid Engine
-Mendeola MD5 w/ New Deco Case and Weddle Helical LSD
-Just refreshed
-Chromoly rear axles with race prepped 930-cvs and chromoly cages
-MicroStub rear hubs
-A-Arm suspension front and rear
-Fox shocks all the way around
-Front 2.0 reservoir coilovers
-Rear 2.5 Triple bypass w/ 2.0 Coil Carriers
-C&R Dual Pass Race Radiator
-Le5 2.4 Ecotec Engine
-Redline Performance Harness and ECU w/ RacePak dash and Data Logging sensor functions (cable and sd card included)
-Wilwood Master Cylinders
-CNC Clutch Slave Cylinder
-CBM Engine Adapter, Flywheel, Kennedy Stage 3 Pressure Plate, 4 Puck clutch
-Billet Redline Performance Water Neck/Thermostat Delete
-Billet Oil filter Adapter for Remote oil filter and cooler
-CNC Turning Brake
-3an Braided Stainless Brake lines
-Wilwood 2 Piston front Calipers
-4 Piston Calipers Rear w/ Inboard Brakes
-Electric Power Steering
-Spare body, arms, hubs
$22000 OBO

2018 Textron Wildcat XX with Speed 72

ID# 181783Posted Nov 10
PREMIUM LISTING
FOR SALE $37,500
2018 Textron  Wildcat XX

Off Road Race Vehicles-181783

For sale is a super clean race ready Textron Wildcat XX Roughly 600 race miles on whole car. Original owner bought new to build into this super clean racecar. Selling because we are changing cars and class for next season. Below are most of the details of this car and its parts I may have missed something. This car has raced and passed tech in both AZOP and BITD in 2020. Please contact for viewing or any questions.

Drivetrain:
Newer engine with 500 miles (previous engine had timing chain failure).
DynoJet clutching primary and secondary kit with electric fan installed in belt cover.
Razorback belt temperature gauge and sensor.
Weddle built front differential and transmission with strength upgrades.
Evo tune and aftermarket header and exhaust system with header wrap.
Spare axles.
New alternator.
New steering rack.
Brand new Tensor 32" tires with Method wheels x5.
Shock Therapy tuned suspension internal work, spring kit and limit strap kits front and rear.
Speed 72" long travel kit with axles, aluminum hubs with brake rotor upgrade.

Interior:
Speed 23 gallon fuel cell and dry brake.
Rugged radios fresh air system.
Sparco seats bot driver and passenger side
PRP 5 point 3" harness dated 2019 sfi
Speed shock assist window nets with Hostyle nets dated 2020 sfi
Rugged radios 60 watt rm-60 and rugged rrp 660 intercom antenna tuned by AZ Wire Pro.
Lowrance Gps.
Three 2.5 lb fire extinguishers with mounts.
Hostyle interior carry bags
Vision X lighting a pillar pods front bumper light and Speed roof light bar.
BITD legal Transponder.
Speed shift handle.
Three rear view mirrors.
This is a really nice built car with low race miles and a respectful owner that takes care of his equipment. There may be some details I missed or questions you may have please feel free to email or call me for more information or viewing of the car. Delivery possible under right circumstances. Please call for appointment to view this amazing race car.

2017 Armada/Robby Woods 6100/ TT Spec truck trades welcome

ID# 181772Posted Nov 10
FEATURE LISTING
FOR SALE $165,000
2017 Armada/Woods 6100/TT Spec

Off Road Race Vehicles-181772

Armada 6100, full Tig welded chassis, 40" BFG, 525hp Adam Wiks engine, ID designs front pulley system with two alternators, quick change power steering pump. EWR coil mounts . Fresh Cuhan TT trans, fresh EWR third member and gun drilled axles. TT Pro-Am steering rack. Carbon fiber dash, Dual GPS, dual pumpers, dual motec screens with speed limiter, two keypads, two Baja design led light bars, Sparco seats, 92 gallon fuel cell, fresh body to accept 40" tires, Robbie Woods rear end housing, the front and the rear of the truck have been redone by Robbie Woods to make it turn better and make it handle better in the big bumps. Robbie Woods custom stainless headers. Lots of spares, custom towable car cover, Truck is prepped and ready to race.truck is like new. 165k OBO, Possible trades for? Call or text Steve.

2019 RZR Turbo BITD PRO PRODUCTION

ID# 181773Posted Nov 10
PREMIUM LISTING
FOR SALE $63,000
2019 Polaris RZR Turbo

Off Road Race Vehicles-181773

FOR SALE – Chupacabra Offroad BITD RZR TURBO. Race Prepped, ready for the Mint 400 and 2022 BITD season (Pro Production legal). Unfortunately, I have to put racing on hold for now, this car is well sorted, with very little abuse or miles. This is probably the most documented UTV race car on the internet, check out youtube.com/chupacabraoffroad (So you want to go racing) to see most all of it's miles on dirt, upgrades and evolution. Car was only raced 4 times. Great handling car, that's competitive, with the right parts, including:

-Fabwerx DOM Chassis 119” Wheelbase
-Lonestar suspension & sway bar w/ brand new trailing arms & welded radius rod box
-Chromoly tie rods
-Sandcraft race built front diff
-Fresh motor tagged for BITD (only 200 race miles)
-Pro XP Trans with 900w Stator & Dual Regulators
-Queen racing tune on 50/50 race gas
-All Tech tuned suspension w/ Hi/Lo Compression
-ST Billet Steering rack
-CNC buggy brake pedal
-UTV Inc Chromoly motor mount
-Super ATV Rhino 2.0 Axles
-Method 401 R wheels & Tensor 33” DS tires
-Baja Designs Lighting: LP4, Onx 40” and RTL rear
-Dash: UTV Racepak, Switch Pros & AIM belt temp sensor
-PRP Bravo seats
-CBR Radiator/ Intercooler w/ Dual fan setup
-26g Fuel cell
-BITD Pro Production Legal
-Rugger Air Pumper
-PCI Radio
-FOA race Jack
-Grade 8 hardware, FK Heims

$63,000, full asking price gets spare package including: clutches, suspension, belts, spindles, power steering pump, wheels and tires, etc.

NO TRADES, Serious Buyers Only

Alumicraft 1 1600 – SOLD - Thanks Race-Dezert

ID# 181755Posted Nov 09
PREMIUM LISTING
FOR SALE $0
2021 Alumicraft 1600

Off Road Race Vehicles-181755

Want to race against +40 cars at Rage at the River in December with a chance to win $10.7k in bonus money? Here is your best chance at taking that top spot; this is the nicest 1600 car in existence.

I plan to race Rage at the River in the car unless someone wants it before; it will be fully prepped. There are a few secrets about this car that I cannot post in the add but will explain with a deposit in hand (100% race legal).

At the asking price the sale includes enough good spare parts to almost complete a second 1600 car.
Please do not hesitate to contact me with questions.

• Engine: Major Performance low comp – brand new (no reused parts) with only BAP on it
• Trans Builder: Folts – brand new ring and pinion… will be fresh before Rage at the River
• Aluminum: Agana Metal Products & CRB
• Shocks: Fox / SDG / Shock Pros
• Electronics: AEM 22 channel receiver & CD7 digital display
• Ignition: Dual MSD
• Fuel Cell: New Harmon Cell with dual in-tank AEM fuel pumps and Holley fuel mats
• Oil Cooler: CBR
• Switches: Switch Pro’s
• Hubs: Proam /Foltz aluminum hubs
• Brakes: Wilwood
• GPS: Lowrance Elite FS
• Fresh Air: Carbon Parker Pumper
• Seat: Sparco
• Belts: New Impact cam lock
• Steering Wheel: MPI with Carbon 6 button switches (all functional)
• Wiring: Eric Deen
• Steering: Howe Diablo
• Misc. Parts: Kartek
• Graphics: SignArt Wrap
• Communication: PCI & Kenwood Radio
• Wheels (lots of the): Methods / RM2 / Centerlines / US wheels
• Tires: Yohakamas / BFG / Tri Ace

The car is on weight, has the best 1600 drive train money can buy (Major & Folts), is tuned by SDG and refined by Shock Pros, has tire pressure monitoring, redundant systems, rev staging for 6k rpm launches, built-in Air/Fuel, cryo heat-treated parts, 3 pages of data to display on the dash, ect. We replace bolts on the car every race and are meticulous about prep. The beam was just replaced by Daniel Deen (ex. Alumicraft employee) and the car is 100% win-ready… This car won the 2020 More ½ 1600 championship.

The sale at the asking price comes with almost enought spare parts to build another car. I included a list of the big items below, but it comes with a lot more. These parts have all be mag inspected and ready to install if needed.

• 90% parts for 2nd motor (sitting at Major’s shop)
• 75% parts for 2nd trans (sitting at Foltz shop)
• Front & Rear Arms
• King Pins / Link Pins
• Complete Howe steering setup (Diablo rack, lines, pump)
• Complete mill spec wiring with aluminum dash & mill spec wiring (plug & play)
• Axels
• CVs
• Bolts
• X2 sets of aluminum hubs with bearings

Class 8 Truck - Ready to race!

ID# 181666Posted Nov 06
PREMIUM LISTING
FOR SALE $99,999
Ford F150

Off Road Race Vehicles-181666

Completely rebuilt and fresh class 8 race truck. The truck is ready to race! Last race was 2017 Baja 1000, which this truck FINISHED! This truck meets ALL class 8 rules, complete frame, susp, etc, Truck runs great. Truck also includes great spares package. Read below:

- Fresh rebuilt 410 Windsor, 560hp/555lbft on pump gas (engine build featured in Dec '09 Off Road Magazine)
- Fresh Culhane C6 Transmission, Hughes torque converter
- Fresh GMR 4" chromoly full-float 9" rear. Housing will receive up to 10" ring/pinion if desired
- Entire frame was media blasted and crack checked during rebuild
- Fresh King 4" King-Kong Bypass shocks with 3" King coilovers (all rebuilt after only one race in their lifetime!)
- Rear 4-link suspension, all new heims (willing to include rear arm solidworks files for the right deal), ProAm snouts/hubs
- King Hydraulic bumps stops in all corners
- Front J-beams, all new heims and crack checked, Desert Specialties hubs (willing to include front J-beam solidworks files for the right deal)
- Lighting: all are Baja Designs 50" LED upper, 40" LED amber front, 30" LED front, front LED spots, rear LED spots, rear LED brake light bar
- 45gal fuel call
- New blue/black paint
- New 37" BFG Projects on NEW Raceline Monster 232 with 5/8" studs, 5x5.5 pattern
- Wilwood 6 caliper pistons (1 race), in-cab proportioning valve
- Momo steering wheel
- Pro-Am 2.5:1 steering ratio multiplier
- Custom swing-set steering system (no bump steer)
- Dual MSD ignition systems (boxes, coils, dual pickup distributor)
- Beard seats
- New Hannemann Fiberglass body panels
- Crow safety belts
- Stroud fire suppression system
- Custom long tube hedders/3.5" exhaust
- Lawrence GPS
- Spare driveshaft onboard
- Spare upper rear link onboard
- ICOM 8000 radio, connected to PCI PTT/intercom system
- This truck has WORKING DOORS, so feel free to throw a windshield in it and make it your bada$$ prerunner. Registration is currently non-op in CA
- CBR/Derale radiators with electric fans
- DC Power Engineering 250A alternator WITH second 250A spare onboard
- Dual Parker Pumper breathers with fresh filters
- 1 set max trax sand ramps
- Aeromotive dual pump fuel system
- Autometer gauges
- CNC brake master cylinders and pedal assembly
- Dual Optima blue top batteries
- Chassis wiring harness by Smith Race Wire

Spares:
- Culhane C6 Trans
- Torque Converter
- Rear 4-link arms lowers/upper
- New and used wheels/tires
- radiator(s)
- misc seals, filters, limit straps, etc
- four 11 gallon dump cans
- at least 4 BFG tires on Raceline Monster 232 Wheels
- spare steering system (swingers, connecting rods, etc)
- there's more spares, I just don't remember them right now


  Off Road Race Vehicles