10 Car package deal!
Comes with 1 10 car
*First 10 car is a GET Performance single seater SOLD
Second 10 car is a Chenoweth 2 seater
Comes with all spare parts needed to race
Multiple power steering pumps
Multiple control valves
Spare alternator for each car
22 spare wheels with used tires
5 new BFG tires
Spare parts for engine
2 fuel towers with hoses
2 electric transfer pumps
Both cars have 2.4 ecotecs DI built by Jeff Gitner
Comes with one non DI 2.4 ecotec
Both cars have Fortin 6 speed sequentials
Will not separate anything
Any additional information or questions contact Jonny 7606944252

THE OFFROAD JEWELERS RACE PREP is a full service RACE/PLAY prep facility with over 20 years of experience,4 Baja 1000 class wins ,4 milestone awards the last one was (RAUL GOMEZ 2022 SCORE TT),Back to Back Baja 500 Class 1 wins with Justin Davis and over 50 class wins in the past 15 years we have what it takes to take your race program/play car to the next level. We SPECIALIZE in taking a struggling race program and bringing it to their FULL POTENTIAL while keeping in mind their BUDGET along the way
We are not limited to just a race program we also have a FULL background of Fabrication services from steel to aluminum we can do it all
We have built or prepped the following car/trucks
TROPHY TRUCK
SPEC TRUCK
CLASS 1
CLASS 10
CLASS 12
CLASS 16
4400
PRO 2
PRO 4
PROBUGGY
SAND CARS

Hi there,
We just finished a Trophy Truck rolling chassis and it is for sale, info below.
We are a company that started building these and offroad suspension parts along with trailers. We are two companies working together, Torqon Industries www.torqon.com and Parabellum Racecraft www.pbracecraft.com.
Torqon is located in NW Missouri and Parabellum Racecraft is just north west of Las Vegas NV.

Rolling chassis start at $70000.
We are selling complete Cad designed cnc tube cut and mig welded rolling or basic chassis with no suspension components, that could be used as a Trophy truck or 6100 truck. SCORE/BITD race legal.
Tubing is DOM except the rear end is 4” 4130 chromoly.
Cage is 2” 0.120 Wall, the rest of the tubing is between 0.120 and 0.95 with little 0.65 wall 2” tube.
4” 4130 Chromoly rear-end with 3 ¼” snouts.
80” Trackwidth and 94” to outside of tires.
125” Wheelbase.
Ford faceplate for a 9” Ford third member.
Rear hubs are Jamar J7000 3 ¼.
60” Trailing arms.
Rear Travel Mid 30’s inches.
Front Travel Mid to higher 20’s inches.
Front snouts are 2.5 with Jamar J7000 2.5 hubs.
Steering designed for HOWE 113 steering rack.
Vision wheels 6x6.5 17x8.5. 3650lbs load rating. -15 offset 4.25 backspacing.
40x13.50R17 Mickey Thompson Baja Legend MTZ tires.

Please feel free to contact us with any questions.
Thank you,
Henry Schickerling
Torqon Industries
www.torqon.com
319-325-8243

Truck is in Newbury Park, Ca 

Truck was featured here on Dirt sports magazine a few years ago. And just recently got a 4Th in the 1450 king of the hammers race held by Terra crew 


Specs: 

2012 with 76,xxx miles. Clean title in hand. Suspension tuned by KDM Shock technologies. 
- Ecoboost tuned by Westech 
- Fully linked with HM's proven TT rear design. (28" travel) 
- Caged front to rear with engine cage, front bumps off the engine cage. 
- Tin work by Morgan Clarke Designs 
- Front 2wd Long Travel (20"+ travel) 
- Rear - King 3.5 x 18" bypass & King 32.5 x 16" Coilover 
- Front - King 3.5 x 12" bypass & King 2.5 x 12" Coilover 
- Swing-set steering by HM Racing with Power Steering Solutions box, ram and cooler 
- Currie Rear End with 10" Ring Gear, spooled with new 40 spline spidertrax axles 
- Dual CBR duel trans fans 
- Harmon Fuel Cell (65 gal) 
- Race Aluminum radiator and engine oil cooler 
- Walker Evans racing wheels x 7 - beadlocks 
- 40x12.50r17 KR3 x 7 
- Baja Designs 40" curved Onx6 bar 
- KC 70 Watt Carbon pods on an actuator in the bed
- Evil Mfg. third brake light with Baja Designs S2 Pro's 
- Lowrance HDS9 for passenger and HDS7 on the drivers side
- PCI - 4 link intercom and PCI VHF radio. Comes with PCI and Pci Headsets, 1 Bose headset
- 4 prp seats with new belts 
- Fridge between the two rear seats
- switch pro power management 
- Two optics battery set up
I have various spare parts, steering pump, axle seals, bearings, bolts, heims, etc. 


Im sure there is plenty that I am forgetting. You won't find a more well built truck in this price range. The attention to detail is incredible. The fit and finish looks like it came out of the Ford Factory. The cost to have this truck built by HM is approx. $300-350k not including the truck.

2021 Polaris RZR Turbo S/Fox Dynamix.

2021 Baja 500 Winner
2021 San Felipe 250 2nd Place
2021 Baja 1000 2nd Place.
2021 Baja 400 3rd Place

I am only selling it because I started a new project.

Current Specs:

- Brand New OEM Engine (0 Miles)

- Tranmission Refreshed & Upgraded by URG Phoenix UTV Group 0 miles (bill on hand) $5000

- Chromoly .091 1.75'' Roll Cage by DYM Raceworks (Score Tag), Bumpers Front-Back, Aluminum Skid Plates, Fully-Reinforced Suspension (Trailing Arms, Front Lower Arms and everything else that Class 39 rules allow) $5500

- Pyrotec Fuel Cell 40gal w/2 OEM Fuel Pumps $4500

- 5 BFG KM3 32" UTV Tires w/KMC Grenade Beadlock Wheels w/ $2250

- KWT Particle Separator $500

- Eibach Coil Springs w/Fox Racing Internal Shocks Set Up $2500

- PCI Kenwood Radio/Intercom $1600

- Baja Designs Full Headlight Kit & Accessories $2500

- NRG Race Seats/5-Points PRP Harnesses $1400

- Shock Therapy Radius Rod Kit, Tie Rod Kit, Sway Bar Link Kits, Front & Rear Limit Straps Kit, BSD Pin Kit, Ride-Improvement System (RIS) $2590

- EVO PowerSports Blow-Off Valve, Clutch, Silicone Tube, ECU Flash $900

- SandCraft Front Diff $500

- Assault Industries Mirrors, Steering Wheel, Shift Knob, Grille, Sun Visors, Storage Bags $1500

Lot of spare parts (hubs, spindles, radius rods, tie rods, upper/lower arms, clutch, etc)

Asking $50,000. Willing to consider reasonable offers.

Selling our very reliable alumicraft grande prerunner.

Car has been fully prepped and ready to start prerunning.
albins 5 speed H pattern
SDG tuned Fox shocks
New LS3
Baja designs lights
110 watt kenwood radio
2 sets of wheels and tires
Lots of extra parts
Pro am hubs and brakes

Will consider trades

2020 Sierra Car RX3
Upgraded RPE engine. ONLY 7 HOURS ON MOTOR.
Pneumatic PADDLE SHIFTERS. Only paddle shifting car made by Sierra.
Sadev gearbox with Reverse gear
Z Bros shocks
Fire bomb fire suppression system
Extra coolers for high altitude driving
Upgraded long and wide arms
Willwood brakes on all four corners
Brake bias
Adjustable power steering with upgraded bill mount.
Sabelt seat and harness

Cost to build was about 120k. I have all recorded invoices for the car.
Raced with good numbers at Pikes Peak twice and Mount Washington.
I raced it in the Colorado Hill Climb Association.

This is the exact car seen in many of the Sierra Cars/Lyfe motorsports documentaries.

Comes with 2 sets of rally wheels and tires, 2 sets of Yokohama wets, and 1 set of Yokohama slicks.

Also comes with the front wing for road racing/pikes peak. Open to Trades for high value super cars or cars plus cash.

This car is one of the fastest things Ive driven and raced.

Racer Carbon Series 6100 Truck 100% Fresh and Ready to Race Baja 1000
Truck has been rebuilt from ground up and prepped by Evan Weller. Painted Chassis, New Jeff Ginter Engine, New ID Design Dual Alternator Plate, James Lin Wiring and Tune, New Herbst engine plate, new RPM Headers, Fresh 0 Miles Rancho Trans, Fresh Underdrive, New Drive Shafts, all new Brown and Miller Plumbing Fresh Rear End, Alcon Brakes, Carbon Fiber Fuel Cell, Bosch Pickup Mat in Cell, King Shocks 0 miles, New Spring, New Little Michael Paint, New Sparco Seats, New Belts, Forged KMC Wheels, Brunngelzl Jack, Bottle Jack, Duel Air Conditioning, Fresh Water System, Vision X Lighting. Much more.
Will consider trade for Class 1 or Class 10 Alumi Craft and cash. $300,000.00