2020 built Class 1 buggy .
112" wheel base
90 miles on car since rebuild.
22" of travel front and rear
650hp 5.3 ls,
Holley Terminator X
37" Tensor DSR w/ BTR wheels & 3 spare wheels w/ tires and 2 extra tires
Mendeola 2D 930 cvs
KING 2.0 coilovers front and rear
KING 2.5 3 tube bypasses front and rear
PRO-AM 2" hollow hubs 4 piston calipers
PRO-AM Micro stub rears 4 piston calipers
PRO-Am steering wheel
PRO-AM shifter
Harmon fuel cell
PRP Comp elite seats
PRP belts
NAV, car 2 car, BT intercom, front and rear facing cameras
Nets, suppression, belts, spare axles, few spare parts, fan, hoses, 4 fuel cans,
Set of method beadlocks with 35" sand paddles and buffs.
Also have pit mats, fire suits, helmets.
Car qualified first overall tequila 250 in rocky point, ran 4th in class battle at primm Car could be Class 10 very easy

1995 F150 Single Cab Pre-Runner / Norra Race Truck.

- LS 427 with GM Performance ECU and 8.5 quart oil pan
- 4L80 Transmission with manual valve body
- Currie Enterprises Full Float rear end with 45 spline spool and 5.43 gears
- BMS Suspension and Chassis
- 4" King bypass shocks with 2.5" coilovers all four corners
- 20" of front travel and 29" rear travel
- Howe Steering GM Box
- 50 gallon fuel cell with dual in tank fuel pumps along with 17 gallon auxiliary tank
- Sparco Seats and Momo steering wheel
- 7 KMC wheels with 37x12.50 Nitto Trail Grappler tires (4 on truck and 3 spares) Truck built around 39" BFG's
- Lowrance 8200 GPS and Kenwood Race Radio
- Wilwood Brakes with added rear hand brake
- Working windshield wipers
- Baja Designs light bars (50" on roof and 30" on front bumper)
- Currently Registered in Montana

Engine, transmission, rearend only 1 Norra 1000 on them. Full race prep completed by Jason LaFortune before 2022 Norra 1000. No additional miles on truck since 2022 Norra 1000. Truck won 2022 Norra 1000 and finished 2nd in the 2019 Norra 1000 in Vintage Open Trucks class.

Will Entertain All Offers, Trades, Payments, etc.

Trades Welcome - Boats / Planes / Luxury Cars / Motorcycles / Trailers

Construction Trades - Foundation / Framing / Remodels / Electrical / Plumbing

Real Estate Trades - Land / Lots / Commercial /

Crypto - BTC / ETH / XRP


Now is your chance to get into a great 6100 truck with all fresh updates and ready to race

Price - $385k

- Built Nov 2023

- Fresh Prep by Brenthel

- New Gen 3.5 updates

- Ready to Race Now

- Comes with Spare Driveshaft, PS Pump, Alternator, Starter

- Pit Support Included at first Race

Text - 949-232-6235 (Jonathan)
Email - [email protected]

Will Entertain All Offers, Trades, Payments, etc.

**We accept Crypto - BTC, ETH**

Now is your chance to get into a great well maintained 6100 truck with all fresh prep and ready to race

Price - $165k


- Fresh Prep by Brenthel

- Ready to Race or Prerun Now

- Comes with Spare Driveshaft

SCORE Legal Spec Trophy Truck Chassis
100% CAD designed, chassis, arms, geometry & fixtures for precision fitment of all parts
All 4130 Tubing CNC cut and fixtured
All Grade 9 hardware
- New Rear Geometry with 60" Trailing arms and lower center of gravity.

Arms: **All Heat Treated**
Engineered using 3D CAD to be as light and strong as possible
100% Boxed with 4130 plate and tubing

Trophy Truck Suspension:
Fox Shock Coilovers
Fox Shock Bypasses
2.5" 4130 Hollow bolt on front snout
7075 Brenthel Custom Aircraft billet hubs

Rear Suspension:
Fox Shock Coilovers
Fox Shock Bypassess

Steering Setup:
HOWE 3.0 Rack with Brenthel Billet Rack Adapter
TT Pump / Servo & Reservoir
B.I. Steering column assy. W/ 4130 shaft & sealed bearings

Drivetrain:
LS3 Tagged 425HP Engine
Custom B.I. Headers w/ precision fitment & specifications (Mild Steel)
Culhane Transmission w/ ID Design tailhousing
Custom torque converter
Rear 4" Housing - Custom Built 4130 with 3.25" Rear Snouts
36 spline TT axles (4340 Material, Solid)
10" Gearworks 3rd member - 5.83 gears
6 piston Jamar Brakes

Drivelines
Fuel System:
1 - Weldon 1100 Fuel Pump In Tank
75 gal. Fuel cell, FIA & SCORE legal

Cooling System:
1 - CBR - Custom double pass radiator w/ 2-14" Spal fans
1 - Custom radiator lines w/ silicone hose
1 - CBR - Oil cooler
2 - CBR Transmission coolers

Interior:
1 - 50w Race Radio
1 - Intercom
2- Sparco Pro2000 Seats
2- Impact quick release seat belt
1 - Lowrance HDS-12
1 - Complete Plumbing
2 - Total Power battery

Wiring & Electronics
- Motec PDM and Motec Display (No Switches or Breakers)
- Sealed Wiring Harness

Exterior:
- Body
Full fiberglass body
All alum paneling

Wheels and Tires:
6-17" Beadlock wheels
6 -40" BFG KR3 Tires

Built in 2021. All the best parts. 100 miles on full prep. Meticulously maintained. New lower front arms, new CV stars and CV prep. Majors dry sump motor. 5 speed H pattern Mendieola.Motec, etc.. All the best parts. Call for more info. Lots of spares. Car is currently on display at Race ready products- 657 palomar st ste C, chula vista ca 91911

GET Performance Aussie Spec Trophy Truck

Built by Gene Towler in Riverside California in 2012 and went through a major overhaul and upgrade in 2021 when purchased, the truck features the best of everything in the industry and can run out the front. The attention to detail in this build including the welding and the finishes are world class.

The truck is very fast in the big bumps, has run 2nd outright at Don River and was running outright 5th position at Finke 2024 before rear wheel studs let go and DNF’d 38km from the finish.

Maintained on a no expense spared part life cycle, everything is documented and the truck comes with a complete Bill Of Materials, supplier part numbers and pricing for absolutely everything. We run this team like a business and have all prep sheets, maintenance records and documentation etc for an easy transition for someone looking to learn the truck or get into off road racing.

Can easily arrange freight for a US buyer, run in unlimited as is, or revert to a 6100 truck or a very capable pre runner.

Driveline
Stewart Knowles fresh build 7 Litre, - Freshened every 1500kms
LS Based RHS Block, CID Heads, Callies Crank, ARGO rods, Custom Pistons
Dailey Pump and Dry Sump
Meziere front plate and water pump
DC Power Alternator
Hilborn 8 Stack
Complete Set of new PWR Coolers fitted 2021
Albins ST6 Strain Gauge Flat Shift - Serviced every 1500kms by Race Trans
3x Drop Gear Sets included to suit different tracks
Dominator Converter
Tubeworks Rear Housing
Tubeworks axles
Tubeworks 3rd Member
Tubeworks Hubs

Electronics
Motec M170 and Motec PDM’s
Lowrance HDS9
Entire Wiring harness and all hardware replaced by Paul Mason Motorsports 2022
New Harmon Race Cell 2022 - 305L capacity
Integrated TPMS

Suspension & Brakes
SDG Valved Kings 4.5 and 4.0 Bypasses, 3.0 Coil Overs, New springs 2022
Jaymar 6 Piston Brakes all round
Turning Brake

Other
Powder Coated Chassis for easy maintenance
Howe 4.5 TT PS Rack, Servo and Pump
10x new KMC Beadlocks
Assortment of new and used 40 and 37” BFG Tires
New Sparco seats and belts 2022
On board twin Fire suppression system



Spares - Over $100k in spare parts including consumables, oils, rod ends, fasteners etc
Full Set of Coolers
Full Set of Front Arms
Full Set of Rear Arms
Tubeworks 3rd Member
Spare Tailshaft
Full Set of Body Moulds
Spare Body Set
DC Power Alternator
2x Meziere Water Pumps
Spare Steering Rack
Spare PS Servo and 2 pumps
Mixed Fluids
Mixed Heims and Uniballs
Mixed Gaskets
Truck will come with every specific tool required

***LIST PRICE IS USD***
Converted $440,000 AUD

1989 Ford Ranger tt,
designed and built with Jody Mason.
-All chromoly tubing 85% mig 15% tig.
- 408 C.I. ARE dry sump LS2
• Holley EFI, CNC ported heads, crower shaft rockers, manley crank, carillo rods,
• Built and tuned by Steve Dose, 460 hp to the wheels /480 tq.
• Mill spec wiring by Mark The Wire Guy.
-Turbo 400 billet internals built by John Wood Automotive CBR cooler and howe heat exchanger.
-Camburg 4” rear housing and 2.5 hubs, Gear works 10” 3rd 5:43. 40 spline axles 14” rotors with 6 piston wilwood aero calipers. 29” travel. Front has custom built beams with dana 44 front hubs, Yukon snouts with chromoly stock pressed in wilwood 4 piston calipers. 19” travel.
-Fox shocks tuned by Tim Lawrence.
• Rear 4.0x18” bypass with 2.5x16” coil overs.
• Front 3.5x16”bypass with 2.5x14” coil overs
• 2” bump stops
-Howe tt power steering pump, Box, ram assist and blow off valve.
-Aluminum work by Alloy Studios with custom 60 Gallon fuel cell, Harmon bladder and foam, Weldon pump and filters.
-Mastercraft 3g seats, fire system. Rugged radios, 7” Lowrance. 10 Methods/ 37” general grabbers, 7 good, 1flat and 2 have 35” paddles.
-Truck has a total of 1,600 miles on it. Very good Truck. Fast and reliable. Reach out for more specific details. Serious inquires only, no trades, 98k.