Complete switch pros out of my sandrail. Still works fine went to ecu master instead. About 5 years old I think.

Also have the remaining sticker label sheets

$500

Jamar Pro-X hubs Front and Rear

These hubs are brand new, in boxes. Been sitting on a shelf, waiting on a project to start, but now need to make space. Just in time for desert season, upgrade your car, or fix a broken car!

Fronts are King Kong spindles, and actually come with a pair of Kartek Spindles for a custom build or upgrade.

Rears are the Mid-board Microstub hubs, that give room for a couple inch longer axle, and more travel. They are for 930 CV's (not included).

Front hub:
https://www.kartek.com/parts/jamar-performance-pro-x-king-kong-front-disc-brake-kit-with-2-piston-calipers-and-10-rotors.html

Rear hub:
https://www.kartek.com/parts/jamar-performance-pro-x-porsche-930-rear-midboard-micro-stub-brake-kit-4-piston-calipers-11-78-rtr.html

$3500

3x3 rear trailing arm and axle set up. Arms are mild steel 3x3 with bearings installed, EMPI chromoly stub axles for bus CV, Sway A Way axles 19-1/4" for use with Bus trans in Bug chassis, 4 boots and 4 Bus CV's. Arms, stubs, axles and boots are all new and never run, only mocked up to a project that got parted out. The 4 CV's are used VW Bus. 999.99 cash for everything. Pick up in Westminster 92683 Phone calls only please! Do not text me, I will not reply!

Pair of used king 2.5x10 coil overs. Comes with 18” 700# main spring and 4” 500# tender coils. Shocks could use a rebuild. $1000 text me for more pics or info

2 seat class 12 engine
Built by Mario's vw performance in Havasu
Been in storage for 5 years
Dyno break in only

Custom length and valved Fox factory race 2.5 coilovers for mid travel, full-size truck. These are specially made for mid travel trucks with a 7” shaft and a shorter 10.5” canister shock body to allow for more up travel and less bottoming out. Most Midtravel systems have more up travel than droop. They have extended rods and stock rods ends and approx. 25” eye to eye with installed extended rods right now. Comes with either flat spring perch or cone perch options depending on 2WD or 4x4. Valved for full size V8 truck. These shocks are perfect for most mid travel kits for Ford, Chevy, Toyota. One of the shocks does have a small ding on top eyelet edge from being dropped. NO SPRINGS. You will need 18” springs for flat perch set up, or you will need 16” for cone perch set up. Shocks and parts $1,500 obo.

V6 nascar engine full costume for off Road racing

112 octane

Pontiac crate engine

Looking to buy a Motec M130 or M150. Good used, please.

Fox 2.5 x10 smooth body remote. Good condition, no leaks
Part#980-02-101. comes with stock and extended eyelets

VW link pin beam 2" longer trailing arms for VW Baja Bug Dune Buggy or Sand Rail. The arms are Woods chromoly high quality race arms for 7/8 link pin. Included are a set of 7/8 link pins with hardware and a set of chromoly through rods 46" for 6" wider beam. This stuff is new and never been run, only mocked up to a project I parted out. All parts in pic are pushing 2500.00 new in store. 1300.00 cash. If your not willing to Pick up in Westminster 92683, DO NOT WASTE MY TIME! Phone calls only, I will not reply to texts!

Need gone close ratio gears came out of a sand car