Well-built Bronco prerunner that just received a complete front-to-back prep, including rebuilt shocks, new limit straps, fresh fluids, wiring updates, brake lines and a fully painted Steel-It chassis. Powered by a strong-running 351 Windsor and set up with 20 inches of front travel and 18 inches in the rear. This truck handles extremely well and is ready to prerun or enjoy in the desert.

**Engine & Cooling**

* 351 Windsor V8
* Edelbrock carburetor, recently rebuilt
* Headers
* New spark plugs and wires
* New alternator
* All fluids recently serviced
* Upgraded radiator with electric fans
* Approximately 10,000 miles on engine
* Transmission reportedly has fewer miles than the engine

**Front Suspension**

* Giant Motorsports beam suspension
* Dana 44 front hubs
* Sway-A-Way coilovers, recently rebuilt
* Approximately 20 inches of travel
* New limit straps
* Bump stops
* Heavy-duty engine cage
* Engine cage already has mounts for bypass shocks

**Rear Suspension & Drivetrain**

* Deaver leaf springs
* Rear bed cage
* Rebuilt rear shocks
* Approximately 18 inches of travel
* New rear limit straps
* Ford 9-inch rear end
* Rear spool
* 4.11 gears

**Chassis & Safety**

* Full chassis recently painted in Steel-It
* A- and B-pillar interior cage
* Five racing seats
* Five-point harnesses for all seats
* Bedliner-coated interior floor for durability and easy cleaning
* New brake lines
* New front wiring harness
* New Optima RedTop battery with rear-mounted battery box

**Exterior**

* Painted fiberglass
* 35-inch tires
* New front tires

Freshly prepped, strong running and surprisingly capable through rough terrain.

This vehicle was built for Toyota Corporation for their booth at SEMA in 2024. It is truly a one of a kind show vehicle. It has over 4000 hours of build time in it. The body is all metal and it has been widen 8”. Everything on it was built in house in Phoenix Arizona. It’s is a truly unique vehicle built with the highest craftsmanship! It has been displayed at a handful of shows over the last year. We have finally decided to sell it and let someone else enjoy it. We spent over $286k to build it this includes the price of the vehicle. We are selling it for a fraction of the price. If you have any questions please don’t hesitate to reach out

This thing is so much fun but building another truck so might let her go for the right person.

408 Stroker forged internals Texes speed head with bald eagle cam 1900 magnusam SC built for 850hp but conservative tune with 445hp to the wheels. It’s not for the faint of heart or unskilled driver.. Eats whoops and so clean to drive..

New OFD twin stick 205 New 4l80 with 500 miles built for 700 hp Cycle D 3200 stall Custom new drive shaft

Front Kings 2.5×16 Coilover & 3.0×16 Bypass Kings 2.0 bumps Blitzkrieg Chevy Solid Front Axle Kit BMS Strapped at 17” but has way more available Steering and engine cage matched Rear C1500 Rear Hanger Set Blitzkrieg Shackle (Mig Welded)(Custom 8″ C-C) Giant Motorsports 64″ Leaf Pack Set Giant Motorsports Ranger 64 Front Hangers Kings 3×18” bypass Kings 2.0 bumps 3.5” housing Mig/ 3/16” Mild Steel, 4130 Axle Tubes. Rear Truss cut for Spring Under Blitzkrieg 2.5″ Rear Floater Hubs Custom 35-40 Spline 300M Axles(Pair) Install Snouts Wilwood Superlite Brake Kit – 4 Piston Calipers, pads, 12.19″ Rotors Install Caliper Mounts Strange 3rd Member – Truetrac, Nodular Case, 1350 16” King coil over & bypass. Rear king bypass strapped at 18” Custom light Baja Design upfront and rear. It got a new roll cage, @prpseats and harnesses. Custom Center Console & storage compartment Rewired American wire kit. Recent paint Top fixed and painted exterior New door jams Weather striping and seals all around. Methods with 35” BFG with spare Too much to list as almost everything has been replaced or upgraded…..

2023 Polaris Pro R for sale.
Motor... Evo header, Gibson exhaust, Whalen ECU, larger throttle body, injector rail, remote oil fill, KWI Ultra shift clutch.
King shocks, King stabilizer links, extended fenders, Method machined bead grip rims with tensor 35 DSR tires, switch pro, baja designs front and rear lighting, 32 gal Pyrotect racing fuel cell with 2 pumps.
MasterCraft seats and 5 point harness, large Lowrance GPS, new cage, aluminum roof, front and rear bumpers with skid plate, starlink, dual lithium batteries, intercom system....80 test hours on car..60,000 USD
Car is located in southern baja, mexico...Can be shipped to san diego....Please contact me by whatsapp...

Awesome truck with great pedigree. Was built by Geiser Bros. for Josh Daniel with a Twin Turbo, then owned by Bobby Pecoy and raced with Desert Assassins. We have had it for just over a year and we took 2nd Place at the 2025 MINT 400. It is a great truck for the roughest courses!!

Excellent Components all around:
-Engine: Danzio P620 Big block Chevy w/Brodix Block and Cylinder Heads
-Danzio Wiring Package. LifeRacing ECU, PDM's, Screens, and Keypads
-RDE TT Turbo 400 Transmission w/ Fortin Underdrive and COAN Billet Super Mega Torque Converter
-Fox Factory Shock Package
-Brembo 6-Piston Brakes w/ Brembo Rotors
-95 Gallon Fuel Cell
-Hydraulic Jack System
-ID Designs Hubs
-Baja Designs Light Package [60" Upper Bar, 2x 30" Front Bars on Actuator, RTL Rear Bar]
-Sway Bars Front and Rear
-Dual Weldon 1100A Fuel Pumps
-Dual 12" Co-Driver GPS's and 7" Driver GPS
-Kenwood 110W Race Radio and Intercom
-TubeWorks Rear End Housing with Xtrac 3rd Member Prepped by EWR
-Sparco Seats and Impact Quick Release Belts
-FiberwerX Body w/ Updated 2026 Hood

Spares Package:
-Front Upper and Lower Control Arms
-Rear Trailing Arms
-Upper Link
-Axles
-Starter
-PS Pump
-Includes the 4 Tires and Wheels Plus 2 Spares On the Truck

Vehicle:
Desert Dynamics Dual sport 3 seater can be converted back to 4 seater
1 5/8 chromoly chassis
Boxed front chromoly arms - Rear chromoly arms
New heated PRP seats
New PRP seat belt harness
LS3 Engine rebuilt by Turnkey Performance new build minimal miles
Engine tuned by CBM Motorsports 625hp
Harmon fuel cell with fuel sending unit
Dual UMP air filters
Custom 8 into 2 exhaust system ceramic coated black
Dual AEM fuel pumps
New fuel filters
Electronics:
Custom fabricated milspec chassis wire harness built by Fastculture Inc
Custom fabricated engine harness built by CBM Motorsports
Switch Pro RCR 12
Switch Pro 8
Baja Design light bar with individual LED lights
KC Dome lights & Belly pan lights
Baja Designs front lights LP6
Baja Designs A-Piller lights LP6
Garmin GPS for driver & passenger
Holley Terminator X fuel management system
Holley 12 inch Pro Dash
Fluid Logic hydration system
ARB onboard compressor
Rear camera system
Dual Optima batteries with battery switch
Drivetrain:
Mendola S5 sequential transmission - fresh build
New Race prep pro am 934cvs
Pro Am 33 spline 300m axles
Pro Am 934 Midboard hubs with 6 piston calipers
All back end just prepped new hiems and bushings
Weddle 5-speed shifter
Front End:
Custom boxed lower arm with uniball
2.0 hallow pro am race hubs
2.5 Howe rack with billet bump steer bracket
Pro Am front disk brake kit for 2 inch hollows vented rotors 4 piston calipers
Pro Am 2” hollow front spindles
Shocks:
King 2.5x10” coil over
King 2.5x10” triple bypass
King 2.5x14” rear coil over
King 3.0x16” 5 tube bypass
Tires:
Ultra bead lock wide 5 17” 2 extra powder coated wheels
BFG KM2 mud terrain tires - good condition
Complete set of paddle tires for Glamis
Metal work:
All metal work done by Baja Shop
All tin work just coated and dzues tabs to match
Communications:
PCI intercom
5 PCI carbon headsets
Kenwood Race Radio - long range

Appraisal Value: $175,500

Sale Price: $130,000.00

Racer engineering sand car

Twin turbo danzio 434ci small block ~1200hp E85
Fortin FRS 5 speed sequential
Big Fox chrome shock package
Full interior, heated seats, stereo, fresh air
Full body paint
STU paddles on ultra beadlocks

RACER CLASS 10 — FRESH FULL PREP — READY TO RACE

Class 10 race car for sale — freshly fully prepped and race ready, long list of new/recently serviced components. Built with quality CBM, Fortin, FOX, KC, Sparco, Raceline and BFG components.

* CBM 2.4 DI engine
* Fortin 6-speed sequential transmission
* Transmission recently serviced by JG Transwerks
* Fortin rack
* Fortin mid-board hubs
* FOX 3.5” rear shocks
* FOX 2.5” front shocks
* 35-gallon Harmon fuel cell with Hydromat
* CBM radiator
* KC Lights
* Work lights in all four corners
* Sparco seats
* Raceline wheels
* BFG tires

RECENT FULL PREP / NEW PARTS

The car has just gone through a fresh full prep, including:

* New fuel pump system
* All-new wiring
* New dashboard
* New 12” Lowrance GPS
* All-new lights
* New CV joints
* New drive axles
* New front upper & lower arms
* New spindles
* New tie rods
* New radiator
* All-new heims and hardware
* Shocks fully serviced
* Transmission serviced by JG Transwerks
* New power steering pump

SPARES INCLUDED
* Spare 1st-2nd, 5th-6th gears
* Spare wheels & tires
* Spare axles
* Spare radiator
* Spare alternators
* Spare clutch
* Spare front lower arms
* New power steering pump
* Additional spares
* Freshly prepped and loaded with quality race components.
* CA title and registration

Located in Chula Vista, CA

Price: $125,000 OBO


Serious inquiries only. Message me for additional details, photos, videos, or any information needed

2004 Chevy Silverado
Moruzzi 6.2L 418” with CNC LS3 ported heads and special sauce
Custom Equal length tri-wye SS headers
Turbo 400
EWR 5.54 Third member
I beam front suspension with 4.4 Fox triple bypass and 3.0 coil over 21” Travel
Rear 4 link with 4.4 fox triple bypass and 3.0 coil over 28” travel with king 2.0bumps
SDG suspension tune with 1500miles on it
Ford 9” Tubeworks rear end & 40spline 300mm axels
17” KMC grenade bead lock wheels
40” BFGs
70gal fuel tank with duel pickups and filters
Howe performance steering box and TC-pump
Jammar 6 piston calipers and rotors with hydro boost break system.
Jammar hubs & snouts
Curtleduc rear sway bar
Holly terminator X ECU & 12.1” dash
Fiberworks 2016 body
Copyboy wrap and design
Sharp Auto center console & headliner and custom wiring
Switch pros
PCI Garmin tread XL GPS
Added Front bumper/skid plates
Added Skid plate under engine
New Upper KC lights 6EA
Grill light. 40” radius amber/white Baja designs
Rear dust light mount & Baja Design
50w & 100w PCI Radios & intercom
Air conditioning w/stock front blower and added rear cab blower/ condenser
Center console- shifter -radios-switch’s- cup holders-storage in back by Sharp auto
Speed energy tools
Snap on Impact
Added Fuel fill hose
New optima Red top Batteries
Added Wipers and fluid by Stewart race works
New MPI Steering wheel with buttons

Rebuild fresh engine by Chris Wheeler
418ci iron block
11-1 compression
CNC ported ls3 heads
Lunati forged crank
Lunati forged rods
Diamond racing forged pistons
Custom billet cam motion camshaft
Ls7 lifters
Billet roller timing set
High volume oil pump
Chromoly pushrods

625hp on pump gas at the crank. 452HP & 425torque to the ground on 40” BFGs

Isenhours suspension prep

All new aircraft hardware, new upper links, new 3rd member, foot rests in cab, new rear rotors, new brake pads, new seals on hubs, new front hub bearings, new rod ends, new king pins, sandblasting and paint, drive shaft service

See @redchevyprerunner on insta for more.

1985 K5 Blazer Silverado 81K miles
Professionally built
Straight body, decent paint, no rust
Low miles on build

ENGINE
Rebuilt GM 350
Aluminum Heads
Roller Cam
Aluminum Roller Rockers
Polished intake
Rebuilt Built 700R4 automatic transmission
NP208 transfer case
Stainless Headers
New battery

FRONT END
Custom 3 Link
Custom crossover steering
3.0 King Coil Overs
PSC quick-ratio steering box
2.5 King Hydraulic bump stops
Stock front axle with 4:56 gears
Disc brakes

REAR END
GM 12-bolt rear axle with 4:56 gears, Disc brakes and Detroit Locker
Custom Deaver Leaf Springs
3.0 King Triple Bypass
Disc brake conversion
Custom rear shock/cage mounts

CHASSIS
Custom roll cage
1-3/4" tubing
Cage tied into frame
Custom bumpers
Rigid Lighting

WHEELS & TIRES (5)
37x12.5” General Grabber Red Label Race Series ("competition use only")
17x9” 6x6.5 TT Polished Method MR101 beadlock wheels
New Method beadlock rings and 12 point hardware
Custom 6x139.7 to 6x6.5 wheel adapters

INTERIOR
Clean Interior
3" 4-point harnesses
Removable original back seat
Off Road Racing seats
Bluetooth audio
Momo steering wheel
Electric windows

BODY / TOPS
New Windshield gasket
New side glass gaskets
New window seals
New top/cab seals