**For Sale: 1996 Ford Bronco XLT – Built to Last!**
**Price:** $44,000
**Location:** Imperial, CA
**Specifications:**
- Engine: 351 Windsor
- Transmission: John Wood built E40D with Manual Transfer Case
- Mileage: 215,000 on odometer. 3500 miles since ground up build.
-Fabrication, Desolate suspension, steering professionally installed by Axis metal designs.
See below build sheet for detailed build specs.
This is not just any Bronco; this is a ground-up build, designed with durability in mind. We fully rebuilt the motor and had the transmission, torque converter, and transfer case expertly crafted by John Woods. While it may not win beauty contests, this Bronco is ready to tear down the Baja peninsula and back without any issues.
Our family has put on only about 4,500 miles since the complete rebuild—unfortunately, we’ve outgrown it, and it hasn’t seen as much use as we anticipated.
If you’re looking for a reliable, tough, and capable vehicle that’s ready for your next off-road adventure, this Bronco is for you!
**Contact:** Quentin Tucker
760-791-9696
### **PowerTrain/Mechanicals**
- **Camshaft Series:** Rattler Part# 228005-09S - $617
- **Lifter Set Series:** Part#91213 - $715 (OE Style Performance)
- **COMP Cams Dual Valve Springs:** Outer Spring O.D.: 1.430 in. - $130 (Part Number: 249-985-16)
- **Scat 4340 Forged I-Beam Rods** - $415
- **Keith Black KB Performance Pistons:** Part Number: KB151-STD - $400 (Summit Racing Part Number: UEM-KB151-STD)
- **070-154-3603 High Performance Head Bolt Kit Small Block Ford 351 Windsor** - $100
- **Injectors:** MOTORCRAFT CM5255 Stock replacement - $976
- **Spark Plug Wires:** FMS-M-12259-M301 Spiral Wound, 9mm, Black, 135 Degree Boots - $210
- **Edelbrock 3881 Performer Truck 5.8 Intake Manifold, Ford 5.8L:** Part # 3253881 - $1,000
- **BBK 3501 Twin 56mm Throttle Body, 87-96 Ford F Series 302, 351** - $400
- **JBA Headers:** Part Number: JBA-1628SJS - $600
- **Duralast Gold New Distributor** - $115
- **2-ROW CHAMPION RADIATOR** - $600
- Two 14" Pro-Series Electric Fans and Shroud
- **Starter:** PWM-19503, Mini, Offset, Chrome Plated, 3/4 in. - $349
- **6046 Optima 34/78 Specific Dual Battery Tray Wide** - $130
- **200 AMP 7750 Alternator Ford High Output Performance HD NEW USA ** - $131
- **John Wood Built Transmission, Transfercase, Torque Converter** - $5,500
- **Stacked Plate Transmission Oil Cooler With Shroud and Spal Fan** - $278
- **Saginaw Pump Steering Kit** - $1,676
- **Power Steering Fluid Cooler:** DER-13210 - $46
- **AutoFab Transmission Mount:** FTM110 (FTM-110) - $145
- **AutoFab V8 Motor Mounts:** (FTN-302) - $300
- **9" Ford Trac-Loc with 31 Spline; Limited Slip; Smooth - 2 Preload Springs** - $826
- **Yukon Master Overhaul Kit for Ford 9" LM603011 Differential** - $308
- **High Performance Yukon Ring & Pinion Gear Set for Ford 9" in a 4.56 Ratio** - $430
-** Vehicle Speed Sensor (VSS) Relocation $386
- **Fuel Tank Parts. - Gas Tank Access Cover, Sending Unit Kit / Fuel Pump Kit, Rear Tank Filler Hose, Upper/Lower Tank Straps and Breather Valve, etc. Total:** - $686
- **Bronco Fuel Tank Skid** - $300
- **Raceflux-06AN Fuel Line Kit** 135 x RaceFlux Lightweight Viton Racing Hose for Fuel and Oil, -6AN Fire Sleeve
135 x RaceFlux 3/4" ID Aluminized Kevlar Heat Sleeve, inches
2 x Fire-Retardant Silicone Heat Shrink Seal, -6AN to -8AN Hoses, 2.5" Length
HHS-1025-64 - $425
- **Four Seasons A/C Compressor Kit** - $298
-**Complete A/C new, Evaporator, condenser, blower motor**-
### **Suspension**
- **DESOLATE MOTORSPORTS (Stock Width) 3.0" Shock Front Package** - $5,500
- **Factory Race 3.0 X 12 Coil-Over Internal Bypass Remote Shock - DSC Adjuster** - $4,500
- **DESOLATE MOTORSPORTS Bronco Race V562 Rear Spring Package** - $2,300
- **Factory Race 2.5 X 12 External Bypass (3 Tube) Piggyback Shock** - $3,200
- **-Axis Metal Build
Install front and rear Desolate suspension
Modify and install 9" rear end
Install front and rear stainless steel brake lines
Install Dana 44 gears
Front end alignment
Install power steering cooler
Install LED light bar
Stainless-steel brake line
Brake line AN-3 fittings and brake line shut off valve
Quick adjust load securing track
(4) Straps
(4) Tie down rings
Rear drive shaft with 1350 U Joints
(2) 20" limiting straps
Front axle U Joints
Ball Joints
Front drive shaft U Joints
Black lug nut kit
1-1/4" x .120" wall chromoly tubing (steering)
Threaded weld bungs
Desolate Motorsports
Rear leaf spring shackle
Front leaf spring mount
Front receiver hitch
Materials Axis rear bumper and spare tire mount Total** - $12,000
- **DESOLATE MOTORSPORTS Fully Welded Bronco 80-96 "Sport" Roll Cage** - $3,500
- **9in Floater Rear End Include Kit**
31 spline floater kit, includes new housing center w/3" x .188 wall tubing,
axles, hubs, drive plates, rotors, caliper brackets, bearings and seals.
66" wide 33" from drivers side wms to center of pinion
5 x 5.5 b.c.
Off road axle option
3.25 x .313 thick tube
Back brace
11.5 rotor option
Wilwood brake kit - $3,438.76
- **Threat Motorsports Double Swing Swinger Kits. Package #2** - $1,825
- **Bergeson Heavy Duty Replacement Steering Shaft** - $300
- **32085 Bronco Spindle For 2 Piece Hub Seal D44 TTB** - $442
- **Tires BFG KM3 35in** - $1,500
### **Interior/Body**
- **Dynamat Sound Deadening Interior Cab**
- **Bronco Graveyard Ford Bronco Complete Vinyl Floor Cover** - #57 GRAY - $420
- **33100 Bronco Body OEM Style Mount Hardware Kit** - $445
- **Lowrance HDS 7 GPS** - $700
- **Kenwood 110 Watt Radio** - $1,000
- **Back Window or Dual Tank Fuel Switch Repair Bracket** - $40
- **Complete Installation Wiring**
-150 amp breaker, ML-ACR, Anderson connectors, Deutsch connectors, wire, heat shrink, battery cable.
Console wiring
center console plates
sending unit mount
under hood electronics mount
Installation12v socket tube mount
radiator hose plate
Bronco wiring - $2,400
---*Bronco Purchase $13,000*
**Total Value Investments:** Over $75,000 invested.