2020 ford raptor gen-2 Evil fabrication built long travel 3-link rear.

Truck has the highly optioned 802-a and additional options package,with tax cost was originally $90,000.00

$$$ Offers,$$$ and partial trades will be considered,send details/pics/price you want.late model wave runners, vehicles,any and all quality items I can sell.

California plated and smog compliant,registration just paid good until November 2025. No smog is required for another four years since it is a newer truck.

Pink slip/title in hand,no lien holder,Vin # and Carfax in person.no accidents,no salvage etc

7,000 miles currently(all on road by me),bought it with about 2500 miles and I drove it down from San Jose.it was originally built to showcase a high end auto spa business in Las Vegas.

Proof of financing in place or funds available for appointment,no disrespect intended,no joy rides.for peace of mind before buying I can take truck to any Huntington Beach automotive facility you choose for a full inspection(you pay cost).

Pics of the build sheets/invoices total approximately $100,000.00 . Are included below.

Powder coating is now black on both bumpers,roof light rack,wheels,rock sliders/steps.

If you are looking for a gen 2 and don’t want to wait for the time it takes to build,here you go..

Click the "Related link" above to see the RDC feature.

Big, nasty, 2 seat Truggy. This is the real deal. Simple, fast, reliable & STRONG. This car can take anything you can throw at it, repetitively. There is not much that compares to the unique experience of driving or riding in a Truggy like this. The car has gone through a complete restorative transformation at Morgan Clarke Design / MCD1. Frame off. It is car show clean inside & out. Everything is cherry.

Specs:
Armorcraft 4130 chassis [modeled loosely after landshark proportions]
4800lbs wet
93.00" track width
130" wheelbase
Centerpivot a-arm front suspension [24" travel, boxed/plated arms, TIG welded]
Triangulated 4-link rear suspension [36" travel, boxed/plated trailing arms, TIG welded]
Camburg rear housing w/9" [custom diff cooler plumbed into housing]

KDM shock technologies tuned suspension
King shock package, completely rebuilt, recoated, valved
2.5"coil, 3"bypass, 2.5" hydro bump, blacked out everything on each corner
Turnkey 427ci Ls3 [650hp/pump]
Culhane T400
Fresh 3rd member
Armor craft TT hubs front & rear [fresh bearings & prep]
PWR oil cooler, diff cooler, trans cooler, radiator
Fire suppression system
Method beadlocks x5
40 BFG race tire x5
Baja designs light package front to rear including rock lights & map lights
RPM headers
MCD1 exhaust
Cookcraft mufflers
RPI aircraft certified 12 point hardware on all landing gear front to rear
Fresh prep on everything. Safety wire, fresh hardware, fresh bearings, fresh rod ends, torque sealed etc.
Brown & Miller plumbing throughout the car. All black & gold fittings.
Rewire on entire car
MCD1 spec Livorsi gauges
Switches & breakers
PSS TT steering package [Big rack, pump, pr valve, servo]
Rear diff cooler w/stainless hardline plumbing & Tilton pump
3G seats
Parker pumper
PCI intercom / radio
Headsets
MCD1 center console/dash/central storage glove box
-upholstered in alcantara with silver stitching
-cupholders
-12v ports
Dynamat on everything
Heat insulation on firewall & tunnel
dead pedals in each footwell
MCD1 Truggy body/panels
-functional roof scoop
-cowled hood hawk
-fully skinned with numerous heat extraction panels w/stainless mesh
-panels are powder coated then exterior is painted over professionally [DARK ROOTBEER METALLIC]
-radius windshield with frenched in glass window [glued in just like a OEM car, no ugly rubber gasket etc.]
-professionally tinted 2 layers

This car is proven. It's a simple vehicle to operate & to work on. It is extremely rugged & is capable of maintaining race pace speeds through all desert conditions. No stone was left unturned throughout the rebuild/upgrade at MCD1. The vehicle carries a special presence & demands attention anywhere it goes. There is nothing like it.

Walk around
https://youtu.be/fp21x5I0V_U?si=Sw1Ldk7Lbhjni3Gu 2020 Jimmy's RW1

Drive
https://youtu.be/Uk94cx7jasQ?si=zZsv6H4DbgwAScpu

Ultimate Trail Car!!

Chromoly TIG welded everything- The Fab work on it is simply amazing

Never rolled or been on its side, barely used much at all really
Always stored indoors, well maintained and ready to go, no issues

GM Crate LS3 with bolt ons (Cam, intake, headers, other misc)
Holley ECU and Dash
Switchpros
Lowrance GPS
Reid/ ATI Fully built transmission
Atlas 2 Transfer case
Gear works 10" diffs
Spydertrax pro series housings/ 40 spline shafts
74Weld Billet Portals all around
Wilwood Brakes
KMC 20" Beadlocks
BFG Red Label 42" Tires (With new spare tire/ wheel)
King 2.5" internal bypass 14" front and 16" rear
King Bumps front/ Rear
PSC steering Front/ rear (Dual pumps and coolers)
Pyrotect Fuel Cell with Holley Hydramat and foam
Rock Lights
Warn 9.0 RC Winch with Synthetic line
PCI intercom (No headsets)
PRP seats (heated)
PRP wheel and Harnesses

Transmission/ T-case/ diffs are Cerakoted, aluminum panels are powder coated black and also wrapped with a topographic design. everything else is clear powder coated

Much much more than listed here, over $250k build

Located in Livermore, CA

I'll take $120k Firm

Extreme Performance Eco 4 seat Sandcar

4.2L Nissan V6 Turbo set @ 10 psi/boost controller

Crower Kit built heads

Built and tuned by Danzio Life ECU

PBS 4 speed sequential transmission

934 CV’s /King Shock with new springs

Built to take the power, 600+ hp to wheels

HD cooling fans with oil cooler

PCI radio with 4 headsets

PRP seats with 5 point harness.

$46,500.00

Contact Pete (760) 803-8208

Located in Escondido, Ca.

This 2021 Ford Bronco SEMA Build, built by Rockstar Performance Garage is ready for show AND go! Only 21,500 miles on Black Diamond 4 X 4 with multiple upgrades including: Camburg Kinetik Billet upper control arm and rear trailing arm kit, Fox Elite 2.5 suspension, Paint matched ADV 5 in. fenders and Ram air hood, Dirty Life Canyon Wheels, Mickey Thompson Baja Boss AT tires, Baja Designs A-Pillar and S2 Pro Spot lights, Magnaflow 3 in exhaust, K&N cold air filter, R1 Concepts drilled and slotted rotors, Warn VE Evo winch, Factor 55 Ultrahook, Bestop Trektop Slantback soft top, Rugged Radio GMR45, 4WP front and rear bumpers, Helix Sound System and much, much more! Over $126,000 invested in this immaculate build!

GET Performance Aussie Spec Trophy Truck

Built by Gene Towler in Riverside California in 2012 and went through a major overhaul and upgrade in 2021 when purchased, the truck features the best of everything in the industry and can run out the front. The attention to detail in this build including the welding and the finishes are world class.

The truck is very fast in the big bumps, has run 2nd outright at Don River and was running outright 5th position at Finke 2024 before rear wheel studs let go and DNF’d 38km from the finish.

Maintained on a no expense spared part life cycle, everything is documented and the truck comes with a complete Bill Of Materials, supplier part numbers and pricing for absolutely everything. We run this team like a business and have all prep sheets, maintenance records and documentation etc for an easy transition for someone looking to learn the truck or get into off road racing.

Can easily arrange freight for a US buyer, run in unlimited as is, or revert to a 6100 truck or a very capable pre runner.

Driveline
Stewart Knowles fresh build 7 Litre, - Freshened every 1500kms
LS Based RHS Block, CID Heads, Callies Crank, ARGO rods, Custom Pistons
Dailey Pump and Dry Sump
Meziere front plate and water pump
DC Power Alternator
Hilborn 8 Stack
Complete Set of new PWR Coolers fitted 2021
Albins ST6 Strain Gauge Flat Shift - Serviced every 1500kms by Race Trans
3x Drop Gear Sets included to suit different tracks
Dominator Converter
Tubeworks Rear Housing
Tubeworks axles
Tubeworks 3rd Member
Tubeworks Hubs

Electronics
Motec M170 and Motec PDM’s
Lowrance HDS9
Entire Wiring harness and all hardware replaced by Paul Mason Motorsports 2022
New Harmon Race Cell 2022 - 305L capacity
Integrated TPMS

Suspension & Brakes
SDG Valved Kings 4.5 and 4.0 Bypasses, 3.0 Coil Overs, New springs 2022
Jaymar 6 Piston Brakes all round
Turning Brake

Other
Powder Coated Chassis for easy maintenance
Howe 4.5 TT PS Rack, Servo and Pump
10x new KMC Beadlocks
Assortment of new and used 40 and 37” BFG Tires
New Sparco seats and belts 2022
On board twin Fire suppression system



Spares - Over $100k in spare parts including consumables, oils, rod ends, fasteners etc
Full Set of Coolers
Full Set of Front Arms
Full Set of Rear Arms
Tubeworks 3rd Member
Spare Tailshaft
Full Set of Body Moulds
Spare Body Set
DC Power Alternator
2x Meziere Water Pumps
Spare Steering Rack
Spare PS Servo and 2 pumps
Mixed Fluids
Mixed Heims and Uniballs
Mixed Gaskets
Truck will come with every specific tool required

***LIST PRICE IS USD***
Truck is currently in Australia, Can arrange freight to Las Vegas or San Diego at buyers cost

Brenthel 6100 truck with all fresh prep and ready to race

Price - $165k

- Ready to Race or Prerun Now

Specs:
BajaTrophy Truck Chassis / Frame:
SCORE Legal Spec Trophy Truck Chassis
100% CAD designed, chassis, arms, geometry & fixtures for precision fitment of all parts
All 4130 Tubing CNC cut and fixtured
All grade 9 hardware

Arms: **All Heat Treated**
Engineered using 3D CAD to be as light and strong as possible
100% Boxed with 4130 plate and tubing

Trophy Truck Suspension:
3.0” KING Shock Coilovers
4.0” KING Shock Bypasses
2.5" 4130 Hollow bolt on front snout
7075 Brenthel Custom Aircraft billet hubs

Rear Suspension:
3.0” KING Shock Coilovers
4.0” KING Shock Bypasses

Steering Setup:
HOWE 3.0 Rack with Brenthel Billet Rack Adapter
HOWE TT Pump / Servo & Reservoir
B.I. Steering column assy. W/ 4130 shaft & sealed bearings

Drivetrain:
LS3 Spec Engine 525HP
Custom B.I. Headers w/ precision fitment & specifications (Stainless TriY)
Maximum Offroad Transmissions Reid
Case Spec TT Th400
Coan torque converter
Dirt-Tech 4" Housing
36spline TT axles (4340 Material, Solid)
10" Weller Racing 3rd member
6 piston Jamar TT Brakes
3.25" 4130 spindles
Mason under drive Brand New with less than 500 miles

Drivelines
Fuel System:
1 - Weldon 1100 Fuel Pump In Tank
75 gal. Fuel cell, FIA & SCORE legal

Cooling System:
Custom double pass radiator w/ 2-14"
elec fans
Custom radiator lines w silicone hose
Oil cooler
2 -Transmission coolers
1 - Oil Cooler

Interior:
1 - 110w Race Radio
Intercom
Sparco Pro2000 Seats
2- Cam latch seat belt
2- Holley digital dash
Lowrance HDS-10 Gen3 Touch
Lowrance Elite-5
Professional Mil-Spec Wiring
Sealed switches w/ circuit breakers incl.
Total Power batteries brand new

Exterior:
- Body
Full fiberglass body
All aluminum paneling
Dual dry break system

1 Jack and Jack Mount Included
2 5lb Fire Extinguishers w/Mount

SPARES:
8 BFG 40" Tires on Racelines 4 are Race
Ready 4 good spares
Extra fans
Complete Trans cooler with fans
New Coan Torque Converter
Water pump
1 drive lines
Boxes of heims, misaligns, spacers and bushings bolts etc etc new and old Set of Axles
Seat Cushions
ARP Lug nuts
Drive plates
Fuel components
Brake Rotor
Brake lines
New Set of Brake
Starter
Power steering pump
Alternator
Spare tire straps
Sensors
Upper Link
Oils and Filters
Gaskets and orings
Hub seals and bearings
Free Standing fold up fuel tower with hoses
etc. etc. in boxes organized

Geiser bros 3 Seat Luxury Chevy Silverado Prerunner

- Pro Power Racing 455 cubic inch 700 Hp runs on pump gas motor
- Motec computer tuned by James Lin Motorsports
- Stainless Steel Headers
- Turbo 400 Trans
- Electric Transmission Fans
- Chrisman 9” Rearend Housing
- 10” ring and pinion
- 4.0 King Shocks Front and Rear
- CNC Power Assist Brakes
- Power Steering Solution prepped steering rack, pump and servo
- VES vehicle_electrical_supply built alternators [motor plate and tail shaft]
- 90 gallon fuel cell
- Kenwood Radios
- Lowrance offroad GPS
- Method Race Wheels wrapped in 40 in. Bf goodrich tires
- Dual air condition
- Power Windows
- Vision x LED Lights

Owner is Motivated to sell!

1. Tatum Off-Road Class 1 Race Package
Specifications:
· Turn-key tagged LS3 engine.
· Weddle S4D with converter.
· 3.5/4.5 King Shocks.
· 935 CVs Outboard Package with Pro-Am Big Hubs & High-Performance Brakes.
· Dual Lowrance GPS system.
· And more.
Condition:
· 400 test miles, shows as new.
· No expense spared in the build.

2. Pre-Runner
Specifications:
· Four-seat, large and comfortable off-road pre-runner.
· LS3 engine with Transaxle Engineering components.
· 934 CVs with Fortin Mid-Board Hubs.
· 2.5 Fox Shock package.
· Large Lowrance GPS.
· And more.
Condition:
· Runs amazing, perfectly dialed in, and ready to haul all your pre-run gear.
· Only 40 hours of use.
· Recent $20,000+ prep completed.

3. 2008 F250 Diesel Chase Truck
Specifications:
· Ford F250 Diesel with 138,000+ miles.
· Pacific Truck Bed with custom chase rack.
· Dual 45-gallon fuel tanks and stock tank.
· Large race radio, Lowrance GPS.
· Carli Dominator Kit with King Shocks, 37-inch tires.
· And more.
Condition:
· The chase truck is ready to hit the road and support your racing needs without any additional preparation required. No tools included.

4. Custom Deck-Over Race Trailer
Specifications:
· Triple-axle trailer measuring 102 inches wide x 25 feet deck length.
· Features include four under-mount toolboxes, a 12.5K winch, and ice chest mount.
Condition:
· Excellent condition and ready to go.

5. Additional Details:
· All equipment has been garaged and meticulously maintained.
· Includes all spare parts for a comprehensive off-road racing package.
· Owner may consider trades for exotic vehicles or property in Greater Phoenix or Sedona area.