ID# 177432Posted Jun 21FOR SALE $500
Selling a set of custom 4-1 long tube headers with 3” stainless Borla XR1 race mufflers and stainless v-band connectors. 1.75” primaries. Was used on my standard cab 1994 F150 with a 408w motor. Has mounting tabs to bolt exhaust to existing cab floor pan bolts. Header exhaust flanges are for aftermarket heads and will not fit factory Windsor heads. They have a 3” bolt spread (measurement of the holes on each side of the primaries). Everything cost me about $2000 new. Asking $500. Located in San Diego. Sorry, no shipping. Local pick up only.
ID# 177430Posted Jun 21FOR SALE $60
Selling a set of 4 Kartek black 15” limit straps. Perfect condition and only used for mock up. Bought the wrong lengths. $60 for all 4. Located in SD. Willing to ship for shipping fees.
ID# 177420Posted Jun 20FOR SALE $180
**SOLD**For sale is a set of 9 injectors for an LS2 with a factory fuel rail.
THANK YOU RACE DEZ! SOLD!!
They have been cleaned and flow tested at ARCE racing recently, in Santee, CA. (see receipt for 200.00 for recent cleaning).
They were on my car for about one hour of drive time and I decided to go to a different fuel rail injector system which required a different height of injector.
These measure 2.9 inches in total height.
They are a factory ford designed injector with all new O-rings.
I bought one extra for a spare, there is a total of 9 injectors.
These were installed on a F.A.S.T. intake manifold.
Fuel rail has factory decal/label on it, USA. They are original quality FORD injectors.
There are numbers on the side of the injectors, they read, "0 0280 156 127" and "2R3V - B5A"
They will support up to 625 HP or will run well with a smaller 375 Hp engine.
This is a package and I will not separate the fuel rail or the injectors.
Quaility parts, install and drive, no issues, they have been carefully stored and kept in a dirt free environment.
six 1 9 - eight zero 4- 14 sixty. Tom
ID# 177416Posted Jun 20FOR SALE $1,9952020 custom 5 unl
I have a set of class 5 unlimited rear arms and Jamar Pro X brakes for sale. asking $1995.00 for the package. Might also have a few 930 cv's for sale. (Photo shows a Wilwood caliper. Arms will come with a set of Jmar Pro X calipers)
ID# 177419Posted Jun 20FOR SALE $6,000AUDI R8 LAMBORGHINI MANUAL TRANSMISSION
AUDI R8 LAMBORGHINI GALLARDO MANUAL TRANSMISSION V8 6 SPEED with LS adapter plate from SL-C and bolts, also has all the rear suspension components from SL-C (super light cars) parts come off a SL-C that was in a fire but suspension parts and transmission look to be in good condition just need a good cleaning and heims replaced. I also have the rear of the car if you want the full set up with everything else. Asking $6k for everything 7604999544
ID# 177423Posted Jun 20FOR SALE $2,200
Just pulled off my 4.5" carli king pintops the other day. They have 15k miles on them. Selling because I just upgraded to bigger shocks.
Sold as is. Asking 2200 Please text if interested. Thank you. I'd recommend getting them wrapped, coated, or painted (steel-it) to prevent from the elements.
You'll need bushings and misalignment spacers for whatever platform you intend to run these on.
- Carli Custom Pistons and Tuning
- King 2.5", Remote-Reservoir Shocks Front and Rear
- 17-4 Stainless Shock Shafts
- Includes Reservoir Mounts front and Rear
- 11" Front Wheel Travel, 13" Rear
- Fitment: 2020+ F250/350 4x4, Diesel with 5.5" Carli Lift
- Fitment: 2005-19 F250/350 4x4, Diesel with 4.5" Carli Lift
ID# 177409Posted Jun 20FOR SALE $600Ford Bronco
New, powder coated, threat Motorsports rear shock mount kit, and fabricated rear shackles and hangers. Including grade 8 hardware. Text 949-433-6832
ID# 177408Posted Jun 20FOR SALE $1
Wanted... mendiola d2 that needs to be rebuild
ID# 177405Posted Jun 19FOR SALE $150
3 hubs. Desert specialty 40 spline drive plates, one spline plate is messed up. 4) 14 inch rotors with rotor hats, have all bearings and seals
ID# 177404Posted Jun 19FOR SALE $1
I have Dana 44 TTB parts from 1980-85 and 1984-1996 f150/Bronco. Parts include *Auto locking hubs *One piece flange style spindles,and clips
*Retainers and coil keepers
*Three sets of stock radius arms one complete with good bushings and brand new shocks *Three sets of Steering Knuckles *Three sets of front springs
*Three sets of axles *One Differential-3.54 gear ratio
*One steering shaft *One 30 gallon gas tank skid plate All items are up for sale. If your interested please make an offer. Also I am willing to ship parts. Justin (408) 310-1094
ID# 177403Posted Jun 19FOR SALE $100
curry full float 74" s to s tuber works hubs 5 on 5.5 14' rotors with 40 spline drive plates with axels 3'rd member is a strange 9" 543 gears full spool 6 piston tt calipers. 8K obo.
Also have 55" trailing arms with wobble stops canoe style full 4130 $2600
626-824-7926 please text
3 Seat Jefferies Built Ford F-100 Luxury Prerunner Project-Ready for assembly
1995 Bronco PreRunner
2018 Can AM Maverick RS Turbo
Hayabusa Sand Car
Extreme Performance Platinum
Grove Lumber Racer TT