2002 XR650R

$7500

Ready for SCORE/BITD/Legacy

This bike is set up tall (I’m 6’8”). It can easily revert for normal statured riders, no permanent modifications.

There are a ton of parts on this bike, I’ll just highlight a couple things.

- GPR V5 under bar with triple clamp
- Flexx bars
- Clutch/throttle cables +3” from Motion Pro
- Cycra Rebound flag guards
- BD 8” race light (LED bulb installed)
- 200W stator
- Precision Concepts suspension. They anodized the shock reservoir and its sprung for 270 lbs desert expert. It’s got one BITD race on it and a handful of rides since. All internals were replaced when he did the build.
- Faster USA wheels, heavy duty SS spokes, Excel rims (new-ish Dunlop AT81 front and Motoz Desert rear)
- Pro Circuit exhaust
- IMS Rally pegs
- Seat Concepts tall seat, gripper top
- IMS dry break system (including dump can and stand). The screw cap adapter is on the bike now, the dry break has a recent rebuild and goes with the bike.

It’s plated in Arizona but bare minimum. Brake light pressure switch on the rear brake master cylinder (leads on the front as well if you want to tie into that).

I have a ton of spare parts for the bike, they will all go with it. Somewhere along the way I got my hands on carbon fiber fork guards. I never installed them because they’re fairly rare.

Call, text or email. Have van, can deliver for a fee.

Green sticker current, PINK SLIP in hand

Fresh top end
Freshly powder coated tank, new stickers
Coated Exhaust
Pegs
Handlebars
Headlight cage
New grips
The headlight works
6 pack rack
Starts right up
Very fast
Lots of spare parts (reeds, bigger carb, magneto, ect.....)

Haven't ridden it this season except for around the neighborhood

No trades, cash is king

** Fresh Race Bike for Sale!! **

Up for grabs is a a freshly and fully prepped Gen 1 450X. All the goodies ready to race SCORE, BITD, D37, Legacy, etc.

- Fully rebuilt top and bottom end from Bobby at SD Powerhouse (All OEM honda parts; crank, piston, valves, etc)
- AHM Rebuilt Suspension (Baja Race Spec)
- BD 150w rewound stator and custom high output regulator
- Full chassis prep and all new bearings.

All the goodies like:
- Scotts stabilizer & BRP Bar mount
- Pro Circuit T6 Exhaust
- IMS Dry break system, and 3.2g tank
- ARC Lever and Perch
- ICW reinforced radiators
- Dubya/excel wheels
- Dirt Tricks sprocket / DID EVRT chain
- Nitromousse inserts
- Dunlop D739AT / MX34 tires
- Galfer braided brake lines / OEM Pads
- IMS Footpegs
- Hinson billet clutch cover
- DEI Heat wrap on tank and all hoses.
- Cerakoted Cases
- GDay Aluminum hand guard mounts
- Normal Baja prep items like KX swingarm bolt and -10% chassis torque for better compliance.
- etc.

Bike has 0 hours on it and is ready to rip!

More details and photos coming soon. If serious reach out via dm or [email protected].

Priced at $16,500 obo with dual race lights and single XL80 day light, or $14,500 with just a single XL80.

If racing score, also can include all Stella wiring and mounts and GPS if desired.

2009 KTM 65, great bike always maintained. 2 stroke motor, used but not abused. Never had a problem with the bike my son just grew out of it and moved on to an 85. No trades, first $2,000 takes it, great Christmas present.

1998 Yamaha Badger 80cc
electric start
new battery
3 spd
runs well
body in good shape, seat is rough
pink slip in hand
$1400 takes it

Baja kit, runs strong, big gun exhaust and header, 15,000 miles (90% ridden on the street), well maintained, has all original parts.

Not riding at the moment so no need for the bike. Less than 100 hours on the bike. Also have a bike stand and ramp.

I have the title and paperwork needed

$6000 OBO

Call, txt or email: Austin

Good condition bike with full FMF system, jd jet kit, new nutech nitro mousse front and rear, 1 ride on tires

Hey y'all, got a super clean '19 450F up for grabs. Long story short, this was a bike that had a starter and starter clutch go bad with the previous owner so I tore down the bike down, re-greased, and reframed/fixed it all up. 69 hours and all desert ridden. Valves were updated/spec'd a year ago and clutch is all brand new as of last April.
FMF 4.1 slip-on
AHM dez suspension valved for a 160-170 lb rider
Hinson clutch basket with brand new OEM plates and fibers
Mika bars
SDG seat cover
new grips (that aren't installed yet)
GYTR stator cover
Tusk Lithium battery
Cycra skid
Acerbis disc guard
TMD chain guide + a little more.
Has a FX footpeg mount with the kickstand that will be replaced with the OEM F mount prior to selling.

Asking $6K OBO with a clean title, or will trade for a 22+ 450FX or street legal 19-22 KTM, no 23+ china bikes. Can drop the price if you'd like the stock exhaust instead. Thanks for looking!

Have up for a sale a 2012 Ktm 50 changed piston a couple races ago before season had ended. We grew out of the bike and son is wanting to do other things. Would make a great Christmas present for the little one. Has fresh graphics, top end with a couple races, new throttle tube, new grips, new brake pads, tires with 2 races on them and oil changed every two rides no matter the hours. New grips aren’t pictured in the ones on post

2023 kove 450 rally pro. raced once at the 2024 norra 1000. bike did awesome. has about 1600 mile on it from break in and racing. stock with arcebis hand guards, new rear tire and front and rear moouse. dedicated power switch to tower, wired for stella. full factory tower and rally equipment to race. a few scrapes and scratches from racing. bike run perfect. will come with extra oil filters and any stock parts off bike. 9500.00