Brenthel Gen 3 body. Used for one 300 Mile race. Has some normal rock chips and pitting along with a few small cracks but nothing major. Black painted
$1800
Located in montclair

Set of new steel pushrod protectors for VW engine

For single IDF or Dellorto manifold brace with belt guard

TIMKEN NEW HUB BEARINGS
Bearing including race for many different applications including the rear offroad hubs made by Fortin, Summers, Gear 1 and Pro Am. Half price. Part numbers LL225749/10 AND LL420549/10 .Other bearings available on request complete stock of FRONT SPINDLES bearings for performance style spindles including 2" hollow.

KING SHOCKS 3.0 IBP COILOVERS Gen2
Shocks are NEW in the box still sealed ,don’t have to wait for them.
$3400
10-14 FORD RAPTOR BILLET UPPER CONTROL ARMS ALL NEW HEIMS / UNIBALL / PIN ASSEMBLY
$1000
10-14 17-24 FORD RAPTOR / RAPTOR R
FORD RAPTOR LOWER CONTROL ARMS WITH BYPASS MOUNTS
NEW UNIBALL ALL AROUND
$1500
*only reason selling them going on a different build direction * shoot me an offer

Raptor rear end complete. Caliper to caliper. Bought complete drive train and went a different route with the rear end. In NE Scottsdale. $3000 obo

5 motors available:
*2 motors are 9.5 compression (453-455hp)
*2 motors are 13.1 compression “Stroker” motors (578-595 hp)
*1 motor is a “Stroker” 301c.i. E85 motor (620hp)

-(1) NEW/FRESH 9.5 compression motor, complete (as shown) “top to bottom” with brand new carb, springs, bearings etc., totally freshened motor, dyno tuned with dyno sheet and ready to run! - $13,900 obo”

-(1) 9.5 compression is complete, with dry sump pump, alt, belts etc. (exactly as shown motor) just needs freshening, no carb. - $9,900 obo”

-(2) 13.1 compression “Stroker” motors (picture as shown together) manifold to pan, both have 400mi. on them. - $8,500 each obo”

-(1) NEW/FRESH “Stroker” 301c.i. motor (NOT SHOWN) (620hp E85) complete “top to bottom,” carb to pan, NEW Holly XP E85 carb, polished intake manifold, polished heads, fresh 4.125 bore, Bryant 3.750 stroker crank, NEW Ross forged racing pistons, T&D rockers, Crower Titanium rods, Barnes 4 stage dry sump pump-$20,800
Parts are available for freshening these motors (heads, cams, manifolds, timing chain covers, water pumps, all gaskets and bearings, etc.)

Can deliver motors anywhere between California, Nevada, Arizona to southern Oregon as I frequently travel through these areas.

**Call directly for more info before buying/placing bid: (619)222-0301**


Parts are available for these motors for refreshening (heads, cams, manifolds, timing chain covers, water pumps, all gaskets and bearings etc.)

Perfect motors for class 7 race trucks or your class 1, buggy project etc.

Billet aluminum brake light fits 2017+ Ford Raptors and allows for the installation of 3 Baja Designs S2 lights. This kit comes with new mounting hardware, gaskets, prewired LED brake lights and a wire harness to connect your S2 lights to the factory up-lifter switches. Additional gaskets and wire harness available. I have several available for Gen 2 and Gen 3 Raptors. NMO antenna mounts available as well.

- CNC Machined from billet 6061 aluminum.

- Designed and manufactured by small business in the USA.

- Uses existing bolt holes.No drilling required.

- Plug and play integration with the factory wiring for brake, running and cargo lights.

- Wire harness included.

- Three 1w Red LED brake lights.

- NMO Mount available.

- Flat black powder coat finish.

- Baja Designs lights NOT included

Installation:

Remove the OEM light and unplug the connector from the back of the light.

Plug in the new harness to the OEM connector.

Connect the weather pack connector with the red connector to the center S2 light. (cargo)

Connect other 2 weather pack connectors to the outside S2 lights.

Run the S2 harness along the headliner, down the cab to the passenger fuse box area and connect the colored wires to your up-lifter switch wires.

Install light with new screws.

Connect the black wire to chassis ground.

· Its recommended to add a bead of RTV silicone around the top and sides to provide additional water protection.

The Kenwood TK-790H radio is for the best of the best. The 110 watts of power gets incredible range in off road racing conditions. They do not have the yellow ignition wire like some other ones (who wants extra wires). We can do the Race modification for $85.00. These are NOT the old 730h Will ship for FREE. We except PayPal or COD with UPS

• 110 Watts of power
• 160 Channels
• Alpha Numeric Display
• 790h not 730h
• Built in speaker in head
• Remote head ideal for cars or trucks with limited dash space. Mount the body of the radio behind the seat and the remote head is at your fingertips.

Set of front and rear 2.5" 5x5.5 BMS hubs.

All new bearings, races, and seals.

All 4 hubs have new 1.25x14" rotors with
Rotor adapters and 12 point hardware.

Front hubs come with 2.5" snouts and lock nuts

Rear hubs come with 35 and 40 spline drive plates and lock nuts.

Can sell with or without 6 piston wilwood brake calipers with new brake pads and spare pads.