To renew this listing, chose a payment level
$20k OBO. Make offer Started building the Ranger I’ve been dreaming about since high school but life has gotten in the way and I’ve decided to sell as progress has stalled. Receipts for over $28k in parts. Would prefer to sell the complete truck with all the parts, however if you are interested in the truck less some parts we can discuss. This is a good head start and will save some time for someone looking to build a badass ranger. All parts are new (2-4yrs old) and everything has been stored inside. 1995 Ford Ranger Prerunner/1450 Race Project: Clean CA Title in my name (Non-op) 1995 Ranger Cab and ~69% of the stock chassis Firewall and floor removed to make space for a set-back engine All windows removed and intact Doors removed and in good shape Currently setup on a rolling stand with leveling feet Front Beam Setup: Will include all beam CAD files purchased from DIY offroad 4130 Lasercut DIY Offroad 1.5” Bearing HD Race Beams and Uprights 4130 Lasercut DIY Offroad Radius arms (Center Mount With Cross Member) 13” Coleman Rotors 6 piston Wilwood Aero6 Calipers 2.5” Camburg Race Hubs 5 on 5.5 Solo Motorsports 2” DOM Cab Cage: Double pass TIG Welded ~85% of tubes installed and ~69% double pass welded Door bars, etc. left out for build access Haddon Engineering Back-Half : Will include the CAD model for the back half of the truck Designed for compatibility with the Solo Cage Lasercut 2” USA DOM. Mostly .120” wall. All tubes are labeled with PN Lasercut and Formed HRPO Frame Kicks (TIG Welded) 50 Gallon Fuel Safe Enduro Cell (50gal with Bosch -044 pump in tank) Fuel Cell Cradle is double pass TIG welded with aluminum skid plate 2”x.120 wall 4130 Tube, bungs, and heims included for upper links 55” Camburg Lower Links Camburg 4” Race Rear End housing: 72.5” WMS to WMS MIG Welded Housing and upper link mounts TIG Welded 2.5” Snouts 13” Coleman Rotors 6 piston Wilwood Aero6 Calipers 2.5” Camburg Race Hubs 5 on 5.5, 40 spline Machined 4130 Lower Link Mounts Misc Included Parts: All heims and spacers to get the truck to a roller 5x Vision beadlocks (5 on 5.5”). On is mounted on a 40” BFG for test fitting Wilwood Pedal Assembly Blitzkreig Steering Column Kit 74 Weld 24” Sway Bar Arms (20” Center to Center, 35 spline) Camburg hub wrench
Select the type of report you are sending;
Please include any of the following information.
Thanks for letting us know about your concerns.
Complete this form and press the SEND button.
Your message has been sent to the owner.
This link has been copied to the clipboard.