Truck sits less motor/ trans at the moment while engine is getting rebuilt. Lot of interest when it was listed complete. But most wishing it was an LS based truck. Perfect timing to make that transition happen for someone.

Would be looking to get $70Kobo.
- Less motor/ trans/ headers/ engine harness (sniper unit)

Not really looking for trades as I am looking to start another project. But open to see what comes across if you have something of like value or less + cash to make equivalent.

Includes:
Front:
- MMW 1 ¾” kingpin beams w/ radius arms w/ steering w/ trans mount/ brackets/ misc
- King 4.0 7 tube bypass
- King 2.5 c/o with 3.75" OD c/o conversion with new eibac springs
- King 2.5 x 4" bumps
- ProAm 6x6.5 hubs
- Wilwood 6 piston calipers
- Limit straps

Rear:
- ProAm full floater housing/ 40 spline axles/ Strange 3rd member full spool
- 60" trailing arms
- King 4.0 7 tube bypass
- King 2.5 c/o with 3.75" OD c/o conversion with new eibac springs
- King 2.5 x 4" bumps
- ProAm 6x6.5 hubs
- Wilwood 6 piston calipers
- Kartek sway bar
- Dual limit straps

All additional:
- (6) Vision beadlocks & (6) 40" BFG KR3s
- Customer wired (Independence Electric)
- CBR coolers (radiator/ oil/ trans)
- 50gal Fuel Safe enduro cell
- Mcniel Isenhouser clip and bed sides
- Mcniel dash
- Baja LP9s forward lighting
- Baja S2s rear facing lighting
- Holley digital dash
- PCI coms
- Lowrance
- SwitchPros
- MSD ignition and coil
- Jamar peddle assembly
- PRP Alpha seats
- MPI steering wheel/ sweet disconnect
- Front clip & cab currently wrapped in Wicked 3M. Bedsides still yet to be wrapped but can be.

04 chevy 1500. Prerunner project. 90 percent done. Has zona motorsports long travel dront and rear. Back halfed short course 4 link. Gm 14 bolt rearend. Have locker and gears and install kit. Needs done. All the front and rear long travel complete. New ads coilovers and
Shocks on all 4 corners. 2.5”x 10 in front. 2.5” x16 read coilovers. 3x16 rear shocks. Ads bump stops. Has gen 4 6.0 engine. Forged rods and pistons. .030 over. Fresh machine. Cam. Valve springs. Head studs. Single turbo. 1000hp air to air intercooler. Large injectors etc. needs some wiring still to get running. Th375 transmission just rebuilt. Manual valve body. Ratchet shifter. Prp seats. Two buckets for front and a bench for rear for the kids. All new still in packaging. Should be nice ride with a little time invested. Has full roll cage as well. Fuel cell. New fuel wheels and 37/1250/17 nitto ridge grapplers. In north dakota. $25000. Looking for cash only. 701-651-seven seven seven eight. Don’t answer very often. Leave message or text if interested.

I have a 92 f150 single cab
Has a 5.8l engine and trans
Bent beams for lift
8.8 rear axle
Has been sitting for a couple years, won’t start
Selling as is with no pink slip for 1,000$
The white cab on the back is also for sale for 500$
909-900-7868

74 f100 with 78 front clip
Auto fab dual 2.0 front end
New fresh 0 miles Windsor 418 stroker built by ford Performance in anahiem
Fresh c6 trans dyno trans built
Auto fab motor mounts
Auto fab trans mount
Massive c&r aluminum dual pass radiator with oil exhanger cooler twin 16 inch spal fans with aluminum fitted custom shroud
Cbr aluminum trans cooler with 12 in spal fan
9 inshore trussed and disc brake swapped big bearings with spool 4:11 gearing
Full rewire and plumbing
Aluminum fuel tank
Mallory electric fuel pump
Spin in fuel filters
Lee power steering pump and box with power line cooler and filter
Switch pros controller
Interior seat frames center console with winters shifter manual valve body
New OEM led headlights
All gauges auto meter with proper senders
Cab was removed frame was gone through painted and cleaned up
Rear springs Deaver with ruffs stuff u bolt eliminator kit
Great truck just have a few to many projects. Not in a rush to hurry to sell just tossing the idea around
Garage kept needs some finish work like brake lines and some lights

Up for sell is a 56 Willy’s project. Chassis on frame, rolling on axles

Included with purchase

1- long block sbc 350 (unsure of mileage )
1- short block sbc 350
1- th350 trans
1- Dana 20 box
57’ non molested rolling chassis(separate from frame truck is sitting on)
Rear window
Steering column
Signaw steering box
Headlights
Various body seals
Various body trim pieces.
Truck and frame currently on Dana 44 front axle with disc conversion and corp 12 rear end

Hood included (if not in picture shown)

Have too many project to complete and looking to simplify.

Bill of sale only. Cab has vin plate

Open to decent offers.

2001 GMC 2500HD PreRunner unfinished project. 3.0 sway away shocks with a 14” travel. Shocks are brand new never used along with the gas tank. Truck is Fully caged and has about 100,000 miles. The rear suspension is complete and the front needs work. Truck also needs some mechanical and power steering work. Truck was running before the rain. Truck is a 4x4 and has a 14 bolt differential. $9800 OBO

1996 ford ranger, 4wd, 4.0l, 5spd, 4” extended beams, king coilovers, 1 3/4 cage, bucket seats, 37” projects, method wheels, 9” rear axle, 488 gears, fuel cell, giant 3 link rear suspension, needs finishing $8500 obo