Sand Cars

Clean buggy

ID# 148987Posted Jan 14

FOR SALE $15,500
 

4-5 seat buggy with 2110 turbo bus trans fox shocks .just had exhaust ceramic coated , and carb rebuilt by car craft , car is ready to go

2 Seat Supercharged sequential LS6/S4

ID# 148976Posted Jan 14

FOR SALE $42,500
 

For Sale

2004 2 Seat Sand Buggy Supply Long-travel Car (Sand Rail Fabricators)
Light weight (2350Lbs wet), but Heavy Duty, Fast, and Reliable
Strapped to 21” travel all around
Completely repowered in 2016 and gone through – 4 trips since then
Clean Car overall with no issues
King Coilovers and Bypasses all around
Suspension Rebuilt and Tuned by ED in 2016
Supercharged LS6, pump gas 500RWHP
Only 6lbs of boost for reliability
Holley HP ECM and Turnkey harness and Turnkey tuned
PBS S4 purchased new with 4 trips on it
GM style large clutch (Weddle)
Setrab Trans cooler and pump
930 CV’s new RBP axles (4 trips)
RBP Microstubs Rear
RBP Hubs front
Xtreme 35’s on Beadlocks rear
Xtreme 8.80’s on Beadlocks Front
New PRP wide seats and Harness’s
LED Lights
Billet mirrors
120” wheelbase
92” wide rear, 82” wide front (78” when sucked up)
$42500 make me an offer

2004 Quicksand 383 LS6 Fortin Trans Axle

ID# 148947Posted Jan 14

FOR SALE $30,000
2004 Quicksand  

2004 Quick Sand 

CBM built 383 stroked LS6 (2014) 

Fortin 4 speed Sequential Trans axle (2014)

934 Cv's 

Howe power steering pump and rack 

New upper and lower a arms

New 2" hollow spindles 

Cnc front hubs 

Gear one rear hubs 

Fox shocks 

Intercom and car to car radio 

Led lights 

Led whip 

Ump filter

Twin radiator 

Oil cooler 

New 044 fuel pump 

New fuel filters 

Beadlock front and rear tires 

Car has just had a complete service and is ready to dune. Oil and filter, trans axle oil, fuel filters, CV's greased, hubs greased, and new coolant. 

We rebuilt the engine in 2014 along with the trans axle.

Only have used the car 5 times since and don't use it enough to justify having it.

Car is a ton of fun and has been extremely reliable.

Located in Colorado but will meet up closer to you. 

Asking $30,000 obo 

Please call 970-773-1081 

200 Desert Dynamics 4/5 Seater (New/Never Fully Built) OREGON

ID# 148938Posted Jan 14

FOR SALE $16,999
2008 Desert Dynamics 4/5 Seater


$16,999 FIRM


08 Desert Dynamics 4/5 seat 1.5 4130 chassis (new/never fully built)

Org trailing arms, orig front DS (tube) arms, and an overly expensive, overly built, pair of narrower heavy duty DS front arms (because I was planning on heading in more of a desert direction with this build) included as well.

Reinforced bulkhead and 7/8 lower chassis heims up front (nearly twice the static load at 55,690# vs the original designed 3/4 chassis heims that came in at only 28,090# static load)
Setup for Mendi (but only tacked)
Full floor
Some of the rear bracing (engine/trans area) is only tacked in place so it can be setup for whatever engine/transaxle combo you're going to run. So that's cool.

The following items are new:
Tatum 930 midboards w/ 4 piston calipers
CNC 654 Front brakes
(4) Beard Ultra T-1 Seats black/gray (still in the bags)
2" Spindles from Kartek (new style with teardrops)
2.0 10" Fox Coil Carriers and Silver Ebachs
2.0 10 Fox Dual Bypass
3.0 Fox Triple Bypass (One carefully mocked, the other still in the box)
2.5 14" Fox Coilovers with Rezies (these actually have approx 100 miles on them) w/ three pairs of silver Ebachs (one pair brand new).
All FK heims and then some
(2) BFG KM2 33x10.5 tires for the front
(2) BFG KM2 33x12.50 for the rear
CNC Turning brake (Single handle. I've had this for a number of years. Never mounted. Perhaps "NOS" would be a better modifier)

The Following items are used
Howe P118 rack (upgradable manual rack (the 2.5 ram and mounting hardware available from Howe to make it into the power rack or, better, run it with electric assist (what I was planning)) -Lightly used and perfect. Perfect for EPS!!
15x7 Method Beadlocks black (tires mounted) -Used but pretty much as-new and all new grade 8 beadlock bolts
CNC brake pedal (dual tall master), CNC Clutch pedal, CNC throttle, These are the tall masters with ez fill caps. Good condition (bought new, used them for a short period, but they've been sitting in boxes for a while now, so might need rebuild kits. Extra reservoir(s) too).
Full set of black Crow belts/pads. These are used and way out of date for racing, but I've always stored them inside, so they are great for rec use.
A pair of used 2" Kartek spindles -well used (bought these as backups -they need some weld washers/teardrops to make them really reliable)
A real Formuling France steering wheel, adapter, quick disconnect. A true classic.
Loading wheels/tires/spares: One pair of near perfect Centerlines with barely used and highly coveted BFG Mud Terrains (33x9.50). Was going to mount those as spares as pretty light. Always stored inside. Also comes with a pair of beat to hell front Centerlines with beat to hell 7.00x15 tires (good for loading).

I think that's it, but I might have forgotten an item or two (CNC rez rebuild kits, or the like...can't remember everything, but all buggy stuff I have goes with it). Pics from various times.

Located in Oregon Gorge Area (no delivery), so please, serious inquiries only. If serious, please email for more pics. Again, the price is firm as this is a pretty big hit. Not interested in trades. I will delete ad when sold. Thanks!

  Sand Cars