ID# 177370Posted Jun 18PREMIUM LISTINGWANTED $12015 Polaris RZR XP1000 EPS
I need an upper a-arm for the passenger side. 2015 RZR XP1000.
ID# 176747Posted May 24PREMIUM LISTINGFOR SALE $1
Set of 3-Piece Billet OMF wheels with Sand Tires Unlimited paddles. Paddles in good condition. Super light drain bead lock with reinforced inner lip ring, black anodized bolts. 28 x 14 tire/wheel size POLARIS RZR BOLT PATTERN
These retail for $700 per wheel without tires
ID# 176701Posted May 23PREMIUM LISTINGFOR SALE $5,000Can Am X3
This is a complete LSR MTS kit for A CanAm x3. This is +3" per side on the front, and +2" per side on the rear. Will make the machine about 78" wide depending on wheel choice. This kit has about 800 miles on it. never crashed or rolled. In addition to what comes with the kit from LSR this has a pair of RCV rear axles, and 2 sets of tie rods, one to work with stock rack, and one to work with Shock therapy rack.
A few of the heims have a little play, and the upper a arm spherical bearings have some play. The powder coat is worn through in a few places, can easily be touched up with paint, or stripped and re coated any color.
Just to be clear, this is the complete kit from LSR, plus 2 extra tie rods, plus 2 rcv axles, plus the oem cv joints on the LSR axles.
I'm not prepared to ship this stuff yet, but will consider it, putting it on a pallet probably makes the most sense. I'd be willing to drive an hour or so from Cleveland OH
ID# 177507Posted Jun 23FOR SALE $800Polaris Power Steering Unit
Never used, removed from a brand new 2019 Turbo S that was turned into a full desert race car. Retail is $1,774 if you can even find one right now..... Polaris is backordered on these and pretty much everything else currently.
I'll do $800 + shipping
ID# 177441Posted Jun 21FOR SALE $1,200polaris rzr
After market Roll Cage for polaris rzr fits RZR 1000/turbo 2014-2019. powder coated satin black good condition 2 year old. Comes with light bar mount, chase light mount, mirror mount, a rear bumper that connects to the cage and a spare tire gate with piston that holds a 32 inch tire. asking 1200 OBO
ID# 177434Posted Jun 21FOR SALE $1,200Canam X3
S3 cage with roof off of my 2019 canam x3. Powder coated black and it good condition. Very good looking and a lot stronger than stock. Has 2 whip mounts and middle rear view mirror mount. Ready to bolt on your car with no wait times like other manufacturers.
ID# 177410Posted Jun 20FOR SALE $4502018 Can-am X3
Used but in good condition light scratches here and there, no rock damage or signs of abuse, a arms have ball joints installed but no bushings. Tie rods are in good condition as well with good rod ends installed. If you were to order these parts from the factory would be close to $1,000 I’m asking $450 obo
ID# 177344Posted Jun 16FOR SALE $1,750
CSD Racing Cage like new, has whip light tabs, 40” Baja Designs light bar tabs, no light bar, and hole in roof for radio antenna.
ID# 177178Posted Jun 10FOR SALE $950Polaris Pro XP XP Turbo S
I have a New Polaris XP Turbo S or XP Pro front differential. Can also be used on a XP1000 or Turbo using Turbo Axles and custom mounting. Brand New Zero Miles. Part number 1334398. Retails for $1399 asking $950
ID# 177130Posted Jun 09FOR SALE $795
38" VISION X HPR LIGHT BAR
had on our UTV for 1 year, only used a couple of times
ID# 177132Posted Jun 09FOR SALE $600Rigid Ind 40" E-Series Spot Optic
BRAND NEW, NEVER USED, STILL IN THE BOX. In great condition, been sitting on a shelf in my shop in the box. Just making room
Retails around $1,400
I'll do $600 + shipping
2004 Alumi Craft Prerunner
Pro Turbo Race RZR
2007 Sand Limo Squirt 2- seater
2017 Jefferies/ BMS Trophy Truck
Toyota Tundra TRD Offroad 4X4