For sale: Custom Matt Walrath Truggy/ Trophy Truck/Pre-Runner with over 330K invested. This truck is truly one of a kind. Completed in 2017 this Truggy comes equipped with a VIN TAG and Green sticker which is very hard to do with these custom trucks. The custom made/fabricated parts on this truck are like a piece of art. You really have to see this truck in person to appreciate it, pictures really don’t do it justice. Once completed in 2017 Ive spent the last couple years dialing in the truck and hauling ass. All the pictures are recent, just spent 40+ hours re-painting the Chasis, car looks brand new. Prob has about 1k miles on it. Take it from me or anyone else that’s done a build like this, your much better off buying a used car than building yourself. It cost me 4 times as much $ as I thought I would spend and that was just to build it. This thing is dialed in, reliable and ready to go. This car is very fast too, at around 5,000lbs, 700 hp and the suspension setup it has it eats up the massive whoops in Barstow and can hit a top mph of 117. If your looking for something different, eye catching and unique this might be the car for you. Race it, pre-run it, take it to the dunes....leave it as a truggy, throw a trophy truck body on it. Its very versitale and extremely fun to drive. I’m looking for 139k OBO. Like I said I have over 330k into it. Specs
-Truck is lighter than most trophy trucks and weighs about 4,900lbs with fuel. -Chevy 454 LSX engine (around 700hp) with Melling oil pump, fast intake and custom headers/exhaust. Dyno tuned by Westech. -Holley HP EFI Engine Harness/ECU/digital display. -250 amp alternator. -Reid Case Culhane built Turbo 400. -King Shocks Front: 2.5” coilovers and 3.0” x 14” 5 bypass’s.
-King Shocks Rear: 3.0” Coilovers and 3.5” x 18” 5 bypass’s. -Custom Rear End Housing by Matt Walrath: 10” Gear Works third member with a 5.33 Gear Ratio. Perfect for this car, absolutely rips when you punch it, still can hit 117 top mph. -40 spline 300m 1 3/4” axles. -80” worth of Baja Designs Lights. 50” bar on top, 10” amber bar in the bumper and two XL80 pods as well. -Billet Power Steering Solutions Trophy Truck Power Steering Pump
-Fortin Racing PR2 2.5 Steering Rack. -68 galan fuel cell Harmon Racing bladder. -custom headers and exhaust. -PCI Radio, Intercom and fresh air system. -Lowrance GPS. -ProAm Hubs and CNC Brakes. -37” BFG KR2’s mounted on Robby Gordon 17” wheels 5 on 5.5” bolt pattern. -Nitrogen tank mounted underneath car with Bunderson air Jack. -37” BFG Skat Trak Paddle tires for the dunes. -MasterCraft seats (3rd seat can be mounted in back if wanted. Spares that come with car
-one spare wheel/tire mounted on car
-one spare tire with no wheel
-two 37” paddle tires for the dunes
-klixon breaker switches
-spare air filters
-spare oil and fuel filters
-spare driveshaft mounted on car
-spare axles and 4 link arm
-spare slip yoke for 3rd member side and transmission side
-spare 180 amp alternator (250 amp on car)
-3rd seat for back of the car
One of a kind chase truck / car carrier “price reduced” 25k
Brenthel - Trophy Truck / Gen3
2015 rzr xp1000
Class 10 - LOWER PRICE
2015 Polaris XP4 1000 EPS - Low Mile's / Low Hours
2021 regency tri toon
Select the type of report you are sending;
Please include any of the following information.
Thanks for letting us know about your concerns.
Complete this form and press the SEND button.
Your message has been sent to the owner.
This link has been copied to the clipboard.