Luxury Chevy Prerunner

This listing has expired.

1994 Chevy Silverado$85,000.00 OBO
For Sale

lake elsinore

This truck has a fresh prep on it and all new exterior paint with the exception of the cab paint. It was last used to prerun (~150 miles) for the Parker 425. Truck has ~1,500 total on motor and trans. The attention to detail is second to none with over $150k spent. If you have any questions please feel free to ask! I will consider all reasonable offers. If you need a loan, check out

- Full cage front to rear, 1.75” 4130 Chromoly
- Truck weighs 5,940 lbs. (front 3,000 rear 2,940)
- Enclosed cab with all new windows & tint, Gen IV Vintage AC/Heater with defrosters, fully dyno matted cab, Fiberwerx Dash, Garmin 7” GPS, Switchpros unit, rugged race radio, rugged intercom with headsets, rugged brushless pumper, brand new PRP seats (3) and seatbelts, MPI steering wheel (new), all new interior and exterior work lighting via KC cyclones, all headlights, tail lights and turn signals work, custom wiring for the whole truck front to back.
- In the process of painting the interior cage, adding carpet and upholstered door panels and roof.
- Fresh paint on the grill, hood, front and rear fenders, bed liner on the exterior front and rear firewall.
- Professional aluminum work on the rear, fully enclosed with trunk/toolbox/jack, two spares
- 89” front track width, 135” wheelbase (shortened 9”)
- One off front suspension, uppers, lowers, & spindle, 18” travel
- 2.5”x12” fox coilover, 3.0”x12” 5 tube fox bypass, 2.0 fox bump stop, fresh black cerakote and anodizing by KDM
- 2.5” BMS Hubs, 14” rotors, PROAM 6 piston calipers
- Four link rear suspension, 2” upper links, 28” travel
- 2.5”x16” fox coilover, 3.5”x18” 5 tube fox bypass, 2.0 bumpstop, fresh black cerakote and anodizing by KDM
- 4” Camburg full floater housing, 10” Evan Weller third member, 5.46 gears, 40 spline axles currie axles, spool
- 2.5” BMS Hubs, 12” rotors, Willwood 4 piston calipers, BMS sway bar
- GM 6.0 motor, 243 heads with stage 3 west coast cylinder head cnc ported, dual valve springs, chromoly push rods, TBSS intake, 91mm Throttlebody, bigger injectors, custom engine harness, custom RPM stainless headers and exhaust, custom dual intake with UMP cleaners, motor put down 355hp/322tq to the tires (have dyno chart), tuned by Ryne Cunningham
- Culhane 4L80E trans with manual valve body, 3500 stall converter
- Custom swing set steering with Power Steering Solutions (PSS) steering box, ram assist, & pump
- CBR Radiator, engine oil heat exchanger, CBR extra large trans cooler, dual optima batteries (new) on a switch in the cab
- Six 37” BFG project race tires on Robby Gordon black beadlocks and two custom skat track paddles on Robby Gordon black beadlocks, also I can get you any other BFG race tires you need
- Baja Designs 30” curved LED racer edition light bar and XL80 ambers pods on the front bumper

    Pre-Runners   Listing #150538   Posted: Mar 06 Expires: May 16