Jimmy’s 48p Chassis (4400 setup)

It’s been a big decision to consider letting this car go. So much time has been put into the fine tuning and building of both reliability and speed with that work paying off 10-fold. This Jimmy’s 48p chassis has proven to be fast regardless of the crowd or terrain it finds itself in. Podium capable at any race. This is a light leading arm car with tons of up travel at ride height allowing it to suck up just about anything and smile doing so. She’s got a great balance of HP and TQ provided by Scholfield performance giving you all the quickness needed but also making it extremely driver friendly. This allows you to easily put the power to the ground in any surface condition. Maintenance is easy with everything being easy to get apart to gain access to critical components. You’ll have to search hard to find a more competitive car at this price point. Also, keep in mind this car could easily be switched over to a 4800 car. Car has taken multiple podiums in 2023 including wins in the 4400 class against the fastest cars out there. (2nd in the Eastern championship) (3rd in the Western Championship) and headed to Nationals to compete for the possibility of winning the National Championship. Let me know if you have any questions.

Scholfield Performance LSX440
• GM performance LSX block
• Trick Flow 255 heads
• Dart Crank, Callies rods
• Holley 4500 Throttle body and intake
Reid Case 400 turbo trans (built by Chris @ Maximum Trans) All the goodies.
Hero T-case (1.5)
1480 drive shafts by JE Reel

Electrical:
• Odyssey Battery
• Holley ECU and engine harness
• Mechman 240amp Alternator
• Meziere Starter
• The car was completely wired by Benjamin Meade. All very well labeled and done right! Military style connectors that make removing the dash a snap.
Front Axle:
• Spidertrax Pro series 4”
• Spidertrax 40-Spline Shafts throughout, Yukon Super Joints
• Spidertrax Pro series knuckles
• Spidertrax 6-5.5 40-Spline unit bearings with Pro series studs
• Gearworks 10” HP third with 40-Spline spool (4:56 ratio)
• Wilwood 6-piston calipers with 14” vented rotors
Rear Axle:
• Spidertrax Pro series 4”
• Spidertrax 40-Spline Shafts
• Spidertrax 6-5.5 Unit bearings with Pro series studs
• Gearworks 10” HP Third with 40-Spline spool (4:56 ratio)
• Wilwood 6-Piston Calipers with 14” vented rotors
Steering:
• Howe T-HI VOL 1650 ALUM. -8, -16 JIC (GENERATION 4)
• EXTERNAL CHECK VALVE FOR HI-VOL ALUM. T-PUMP
• Howe Double ended ram 10” with shorten stroke and double sealed.
• Quick ratio orbital. All HP hoses are crimped style.
Suspension:
• Radflo 2.5 coil carriers (F/R)
• Radflo 3.0 Bypasses (5-tube) (F/R)
• Radflo Bumps
• Swaybars F/R by Branik
• System has been Custom Valved and tuned by Wayne at Alltech Motorsports.

Fuel System:
• Custom built fuel cell. Estimated 43gal with right at 38gal usable.
• Duel Areomotive A100 pumps. Both are entirely separate for redundancy. Isolated pickups, filters as well as electrical circuits. Pump A runs off ECU and Pump B is an override.

Other Items:
• Rugged Radios system (radio, intercom, pumper)
• Blue tooth intercom system for spotter/co dawg. Really cool for hammers!!
• Warn Zion 10.5 winch with wireless remote, plus in car switch. Factor 55 hook
• Radflo Jack mounted on car.
• Lighting by Vivid Lumen and chase bar by Lazerstar
• KMC Forged wheels and 40” BFG KR3 SR’s (x10)
• The list goes on and on..

Spares:
• Complete set of spare axle shafts with Yukon Super Joints (all spidertrax)
• Spare set of Drive shafts (F/R)
• (2) Two spare unit bearings. One rebuilt, one brand new
• Spare radiator kit with fans
• Complete spare Howe steering system (ram, pump, orbital, brackets, hoses, steering Heims)
• (2) new spare brake calipers. (R/L)
• (4) spare brake rotors and hats
• Spare master cylinder and peddle assembly.
• Spare oil cooler with fan
• (2) spare trans cooler fans.
• Spare fuel pump (New)
• Spare belt tensioner, idler pulley, and belts
• Spare plug wires and items
• (3) spare K&N air filters
• Spare Mechman 240amp Alternator
• Spare Starter
• (1) new bump stop
• Spare Vivid Lumen lights (x4) with various different style lens covers.