2018 Gen2 Raptor with 41k miles. Truck is in an immaculate condition and has the following build: This build comes with HM Suspension Pre-Runner Unlimited kit: • Available in 2wd and 4wd please specify when ordering,
• 16" of usable wheel travel in 4wd.
• COMPLETLY TIG WELDED ONLY
• RACE READY FRONT END
• HAND ASSEMBLED IN THE USA
• +2" 4130 BOXED LOWER CONTROL ARMS WITH 1" BEARINGS ON FRAME PIVOTS
• +2" 4130 BOXED UPPER CONTROL ARMS WITH 7/8 BEARINGS ON FRAME PIVOTS
• 4130 CUSTOM SPINDLES (BILLET AND PLATE CONSTRUCTION)
• AIRCRAFT GRADE ALUMINUM TIERODS WITH HIEMS
• MASSIVE 1.5 SPHERICAL BEARINGS ON SPINDLE PIVOTS
• MIL-SPEC BEARINGS AND STAINLESS SPACERS INCLUDED
• CUSTOM UPPER A-ARM MOUNTS INCLUDED WITH SHOCK MOUNT AND CROSSOVER BAR
• HIGH STRENGTH GRADE 9 HARDWARE INCLUDED
• 300m AXLES
• LIMIT STRAPS • IWE ELIMINATOR
• STEERING CLEVIS
Comes with custom Front Shock Package
• 2.5" FRONT COILOVERS, CUSTOM MADE BY KING FOR HM
• 3.5 KING BYPASS CUSTOM MADE FOR HM
• 2.5" Bumps Stops (Front)
Comes with custom Chromoly Bed Cage setup: • Custom Bed Cage built to have your spare tires lying flat behind the axle • Comes with Custom ProEagle Jack mount (Small wheel)
• CO2 Tank mount and 10 lbs. tank
Rear Suspension setup: • King 4.0 5 tube RS16 and a piggy back reservoir Finned
• Custom Weld-on Bump kit with King 2.5 cylinders • Custom Shock Mounts
• Custom shackles Custom Chromoly TT style 4" housing wider than stock to complete the stance
• Even Weller Third member with10" ring gear
• 4.11 Gears (Trucks pulls hard with the custom tune and doesn’t need any larger gears)
• Spring Perches • ICON XRT Leaf Springs
• Currie Floating Hubs (Requires Custom wheels with 3.7 bore - included in this build)
• Detroit Lockers (Lockers engage automatically) • Retains your ABS and all OE functions
Wheels and Tires: • Package comes with Custom Trail Ready True Bead lock wheels with Black Powder Coated Center and Rings as well as grade 8 hardware. Wheels are 17x8.5 0mm Offset and 3.70 bore to clear the floating hubs. • 37" tires BFG KO2's. (2500 miles on them)
Bumpers: • ADD Frame Cut Pro front and rear bumpers modified to clear suspension and tires
• Custom Wiring Harness by LVJ Motorsports
Lighting: • 7 Baja Designs Squadron Sports in the front • GJ Motorsports third brake light kit comes with an NMO antenna mount and reverse harness (Harnesses by LVJ Motorsports)
Performance: • COBB IC
• COBB CAI
• SCT DBX Tuner
• Custom AO (Auto Octane) Gearhead Tuning with 452 HP and 543 TQ Fiber Glass: • Custom made McNeil Racing front fenders in a +4/+2 size with custom cuts to clear the tires at full bump and articulation
• Custom made McNeil Racing Rear Bedsides in a +4/+2 size with custom cuts to clear the tires at full bump and articulation
• Painted to match OE paint configuration. Full XPEL Ultimate Plus wrap on the entire truck (8k MSRP) There is a Ford Bumper to Bumper warranty left on this truck with 59k miles of service remaining. I did 4k miles oil changes religiously and used Amsoil Signature Series 5W-30 along with a factory filter. Front diff was recently serviced at Ford as well as plugs, engine oil, new COBB Filter and much more. Please reach out for more information about this truck. Over 74k in proper build and some OEM add-ons. Please reach out for more info on this truck. It is priced to sell.
Polaris Rzr 170 Lucas Oil
-------------------2019 Ford Raptor PERFECT DAILY DRIVER ----------------
Trophylite-Current BITD Champion
Tatum Sand Rail
2005 FORD Lariat F150 V8 5.4
The Croc Class 10
Select the type of report you are sending;
Please include any of the following information.
Thanks for letting us know about your concerns.
Complete this form and press the SEND button.
Your message has been sent to the owner.
This link has been copied to the clipboard.