2018 Can Am X3 XRS Turbo R
Moving up to 4400 unlimited class.
Car just finished very respectably in Ultra4 National Championship and Ultra4 Northern Series’. The car is fully race prepped and ready to race KoH 2022. Complete tear down and full service (fluids, filters, belt, bolts, bushings, etc.) just completed. Fire extinguishers are new and all safety gear is properly tagged/ dated for 2022. It’s been a strong finisher and overall a very reliable race UTV. The chassis modifications make this car much stronger and capable of enduring much more than most UTV’s. I am about to enter the unlimited 4400 class and cannot race both cars. I am offering it up as a race-ready car for someone trying to enter the sport, or wanting an extreme-duty trail rig. Adjust the seats, harnesses, add wrap/ numbers/ name, and go RACE! We will be racing UTV and 4400 at KOH and can provide assistance to buyer as needed. Very strong car and capable of solid finishes in Ultra4. Would be an extremely strong trail or rock crawler SXS.
One owner/ Clean AZ title/ License plate and registered in AZ
3,500 miles/ 280 hours (used as recreational stock X3 prior to becoming race car).
Always religiously maintained; Diff fluid changed every race. Engine and gearbox oil changed every other race. New belt before every race. Components like knuckles, steering rack, ball joints, hubs, axles, differential changed once a season at least. Most of these parts less than a season old currently.
Ultra4 4900 spec car- tech tagged and full safety compliance (current dates)
Rigorous maintenance with extremely frequent tear downs. All factory parts rotated out frequently with most parts being near-new. The front frame section eliminates the weakest part of Can Am X3’s and greatly improves rock capabilities. This is a great way to enter UTV racing (Ultra4, Texplex, etc) or to use as a pre-runner or extreme trail rig. Located northern CO 80528.
Obviously, as a race car it will have minor rash on plastics and exposed surfaces. Rear frame section is still modified Can Am OEM and has had minor cracks repaired and gusseted as required. Minor rash on bead rings and skid plates. Overall much cleaner than most UTV’s and meticulously maintained.
Over $60k invested. Specs:
Chassis and General:
-Custom Draco Motorsports .095 DOM 1.75” 10 pnt cage with rear tire carrier/ bumper
-Custom Draco Motorsports front frame section retaining factory suspension pickup points (for class compliance). Extremely robust for sustained Ultra4 use. Tubing thickness up to .250 in critical sections and .25” plate for all mounting points and bulkheads (everything is double shear). Differential can be swapped WITHOUT removing control arms by dropping out of the bottom.
-E Powersteering 700w upgraded steering motor kit with heat sinks and auxiliary cooling fan -CT race Worx BSD tie rod kit
-Rivnuts thoughout for easy panel removal
-SuperATV full ½” UHMW skid plate
-Fully functioning doors with secondary latches for tech specs
-Factory body on sides and rear for 2022 class compliance; addition of front plastic is possible for class rules depending on desired class.
-Seizmik aluminum side mirrors
-Warn Axon 5500 winch with synthetic rope and aluminum fairlead
-Custom aluminum interior dash, console, avionics panel, and metal floors. Easy access to fuel pump and tank for changing fuel types. Increased leg room for passenger (always tight on X3’s).
-Custom Draco Motorsports rock bash plates. Boxed 1/8” frame mount side plates.
-(5) Sano 15x6 (5+1) bead lock wheels
-(5) Sedona Trail Saw 35 x 10R15 tires with 75% + tread (KoH proven tires). New spares available.
-PWRTUNE stage 3int/Inj/Int 17 psi performance tune (211 hp)- KOH tune
-PWRTUNE E85 15 and 20 psi performance tune (227hp)- Short course tune
-Other PWRTUNE tunes installed on PV as well but not used
-Dynojet Power Vision tuner installed in car (can be flashed and engine monitored as req)
-Turbo smart adjustable BOV
-Aftermarket Assassins adjustable clutch kit
-Trinity racing Sandstorm belt
-Flow master 10 series single chamber muffler and cat delete
-Custom Draco rear Mishimoto radiator relocation with Mishimoto fans
-Moroso stainless steel coolant pressure tank
-Custom Draco Mishimoto J-series intercooler with 3x Spal fans and custom ducting
-Mishimoto performance fabric air filter
Suspension, Steering, and Brakes:
-HCR boxed and bash plate reinforced control arms (lowers have 7/8” FK heims for adjustability)
-Keller HD ball joints
-HCR trailing arms with bash reinforcement on bottom
-Shock Therapy Gold Series RIS with shock valving and springs (2.5” IBS and 3.0” IBS)
-Hess radius rod weld-in bungs with dogbone reinforcement
-PRP limit straps front and rear
-HCR chromoly radius rods with FK 5/8” FK rod ends and Shock Therapy TLS kit
-Hess radius rod billet support/ pull plate
-Eibach rear pro series sway bar with heim links
-Schroeder 24” 7/8” gun drilled custom front sway bar with custom arms/ links (similar to 4400 truck)
-Newer 2020 BRP steering rack with Hess steering support brace
-PRP steering wheel
-Hess steering wheel quick disconnect/ hub
-EBC gold sintered brake pads
-RCV Performance Pro Series-2 axles
-RCV chromoly CV driveshaft (2) and carrier bearing
-Smart Lok front differential
-Dirt Launch modified Knuckles and bearings
-Sparco Pro series gripper seats (one is head constraint model)
-PRP custom fit window nets (certified through 6/2022)
-PRP 5 point harnesses (certified through 2022)
-Lowrance Elite ti2 GPS with IR belt temp gauge and display
-Rugged Radios 60w radio
-Rugged Radios intercom
-Rugged Radios two place helmet air pumper
-Galls 100w siren with multi modes and multiple switches
-Street legal turn signals/ horn kit
-KC Hi lites LED Slimlights lights, 10” LED flood, and “Draco eyeball” Flex lights
-Master cutoff switch and separate avionics master (for keeping GPS/ radios alive with eng off)
-XSprite multi-mode chase light with brake/ turn signals
2021 Brenthel - Championship TT $415k
GMC Sierra Luxury Prerunner
2021 Ford F-250
NEW 2021 CAN AM MAVERICK X3 MAX TURBO RR SMART-SHOX
Jeep 10th Anniversary Wrangler
Laser Cutting, Waterjet, and CNC Machining Services
Select the type of report you are sending;
Please include any of the following information.
Thanks for letting us know about your concerns.
Complete this form and press the SEND button.
Your message has been sent to the owner.
This link has been copied to the clipboard.