Advertising supports this site

1995 Ford Ranger Prerunner/1450 Race Project:

1995 Ford Ranger$20,000.00 OBO
For Sale

Torrance, CA, CA
 Ryan Sharp   Private Message
 (310)765-0287   (310)765-0287

$20k OBO. Make offer

Started building the Ranger I’ve been dreaming about since high school but life has gotten in the way and I’ve decided to sell as progress has stalled. Receipts for over $28k in parts. Would prefer to sell the complete truck with all the parts, however if you are interested in the truck less some parts we can discuss. This is a good head start and will save some time for someone looking to build a badass ranger. All parts are new (2-4yrs old) and everything has been stored inside.

1995 Ford Ranger Prerunner/1450 Race Project:
Clean CA Title in my name (Non-op)
1995 Ranger Cab and ~69% of the stock chassis
Firewall and floor removed to make space for a set-back engine
All windows removed and intact
Doors removed and in good shape
Currently setup on a rolling stand with leveling feet

Front Beam Setup:
Will include all beam CAD files purchased from DIY offroad
4130 Lasercut DIY Offroad 1.5” Bearing HD Race Beams and Uprights
4130 Lasercut DIY Offroad Radius arms (Center Mount With Cross Member)
13” Coleman Rotors
6 piston Wilwood Aero6 Calipers
2.5” Camburg Race Hubs 5 on 5.5

Solo Motorsports 2” DOM Cab Cage:
Double pass TIG Welded
~85% of tubes installed and ~69% double pass welded
Door bars, etc. left out for build access

Haddon Engineering Back-Half :
Will include the CAD model for the back half of the truck
Designed for compatibility with the Solo Cage
Lasercut 2” USA DOM. Mostly .120” wall. All tubes are labeled with PN
Lasercut and Formed HRPO Frame Kicks (TIG Welded)
50 Gallon Fuel Safe Enduro Cell (50gal with Bosch -044 pump in tank)
Fuel Cell Cradle is double pass TIG welded with aluminum skid plate
2”x.120 wall 4130 Tube, bungs, and heims included for upper links
55” Camburg Lower Links

Camburg 4” Race Rear End housing:
72.5” WMS to WMS
MIG Welded Housing and upper link mounts
TIG Welded 2.5” Snouts
13” Coleman Rotors
6 piston Wilwood Aero6 Calipers
2.5” Camburg Race Hubs 5 on 5.5, 40 spline
Machined 4130 Lower Link Mounts

Misc Included Parts:
All heims and spacers to get the truck to a roller
5x Vision beadlocks (5 on 5.5”). On is mounted on a 40” BFG for test fitting
Wilwood Pedal Assembly
Blitzkreig Steering Column Kit
74 Weld 24” Sway Bar Arms (20” Center to Center, 35 spline)
Camburg hub wrench

    Project Vehicles   Listing #210409   Posted: Jul 07 Expires: Aug 17