Pre-Runners 

2010 Ford SVT Raptor

2010 Ford SVT Raptor$49,000.00 OBO
For Sale

Avon, IN
 Jon   Private Message
 (925)584-6702   (925)584-6702

2010 Ford SVT Raptor. Open to trades for Built JKU or 2005-2009 super air Nautique

For sale is a 4 door extended cab 4 wheel drive ford SVT Raptor. The body and frame have around 86,500 miles. The drive train has around 1,000 miles. Located in Avon Indiana, 46122. Truck came from Arizona originally, no rust. Can help/ arrange shipping. Can be shipped to the lower 48 for around $1400 with in 6 days.
Engine/Transmission/ Transfer case
-New OEM Ford 6.2 liter crate motor, has a 3 year unlimited mile warranty good at any Ford dealership. Warranty good until April of 2023.
-New OEM intake manifold
-New OEM fuel injectors
-New OEM electric fans
-New OEM serpentine belt
-New OEM battery tray/ windshield wiper fluid tank
-Oversized throttle body
-K&N cold air intake kit
-Valve covers are painted with steel it black
-SCT handheld tuner. (Current tune is set up to run 91 octane)
-Mishimoto oversize radiator. The tranny cooler was removed from the radiator for more coolant capacity and higher flow.
-Custom aluminum blue anodized coolant/ heater lines with Mishimoto rubber hose ends and clamps
-Stainless steel headers and full stainless steel exhaust system
-Mishimoto universal oil cooler. With BMRS -10 lines (engine oil cooler) does not go through the lower radiator hose anymore.
-Lokar flexible oil dip stick for engine
-Bran new 6R80 transmission built by power by the hour. Upgraded billet internals. Upgraded clutch discs, etc. Able to handle 1000 plus HP. Painted with steel it gray
-circle D billet torque converter
-CBR transmission/power steering cooler with electric fan. Has BMRS -8 hoses that connect to transmission and to power steering.
-Transfer case was rebuild and painted with steel it gray
-SDHQ battery terminal kit
-JLT PCV valve oil catch can, mounted on passenger side
- Front and rear drive shaft are painted with steel it gray
-Frame/skid plate/ trans cross member painted with steel it black
-New OEM cv shafts passenger and driver side
-RCV IWE eliminator kit. (got rid of all the vacuum line)
-Brakes are all in like new shape, has second set of calipers mounted on the rear to run a hand brake in the cab. (hand brake is not installed)
Exterior
-Advanced fiberglass front fenders with wheel well liners
-Recon projector headlights
-LEX off road fabricated front bumper and skid plate
-LCA slots welded up
-Full ICON mid travel suspension system. Coil overs with extended reservoir on the front with billet upper control arms, rear has triple bypass shocks with deaver leaf springs
-Beefed up OEM spindles. (welded steel plates/ gussets on them)
-Upgraded solid billet tie rods with high misalignment heims
-LEX off road rear fabricated bumper
-Dual Viair air compressors with 2.5 gallon tank mounted where spare tire would go
-LEX off road bed mounted chase rack. Holds 2 35” tires, 3 5 gallon fuel jugs, ice chest, pelican case, ammo cans
-Paint has some scratches and rock chips
-(4) Nitto A/T terra grappler G2 35x12.5x17 wheel. 80% tread left. (on truck currently)
-(6) Method real bead lock race wheels black. (1) is not a real bead lock
-(2) General Grabber 35x12.5x17 50% tread left
-20% window tint all the way around except windshield
Interior
-LEX off road full interior roll cage. 1.750x.120 wall Chromoly. Cage is mounted to the frame on body mount bushings. So cage can move with the body.
-(3) Corbeau racing seats with 5 point Corbeau harness. The seats and harness are all tied into the roll cage
-The head liner, steering wheel, center console, and dash have all been re wrapped in suede
-Has a custom baby car seat platform welded to the roll cage to bring your child along
-Lowrance touchscreen GPS HDS7m






    Pre-Runners   Listing #166625   Posted: Jul 06 Expires: Aug 20