Advertising supports this site
    Pre-Runners 

Purpose Built Prerunner/ Chase Truck.

2008 Toyota Tacoma$35,000.00
For Sale

Palmdale, CA
 Donald   Private Message
 (949)878-2995   (949)878-2995

2008 Toyota Tacoma TRD Sport
276,XXX miles.
4.0 V6 5 Spd Automatic
Owner since 2014 at 49,XXX Miles.
Clean Title in hand.
Zero Accidents.
Tags just renewed w/ Smog Cert.
Interior is in excellent condition,
Clean & Well maintained.
Wide Open Motor,
Runs strong, with Zero issues.
Oil change every 3000 miles with Mobil 1 Extended Performance 5W-30 with OEM Toyota Oil Filters Only.
A/C & Heater Works Great.
Powered Windows.
Full Limo Tint w/ Sun Strip.

Wheels & Tires:
-5x 17x8.5 MR304 Method Race Wheels
Wrapped in 5x 35x12.5x17
Toyo Open Country M/T.
(Less Than 3K Miles)

Front Suspension:
-Dirt King Long Travel
Heimed Uniball Uppers & Uniball Lowers
-CST Fully Fabricated 4” Spindles
-King 2.5x8” Long Travel Spec.
Coilovers w/ Compression Adj.
-Strapped at 17”.

Rear Suspension:
-Giant Motorsports Link Killer Kit
- Giants Long Travel Spec Shackles, Front, & Rear Hangers,
- 64” Leaf Pack
-King 2.5x16” 3 Tube Triple Bypass Shocks
-Strapped at 19”.

Fab Work & Prep:
All work has been designed and engineered for ease of future maintenance or servicing & is 100 Percent Bolt On.
Use of a minimum of .120 Wall DOM,
& 3/16 or 1/4” Plate, Solid Mounts w/ Urethane Isolators, Grade 8 Hardware if not higher, All mechanical/ mission critical bolts have been anti-seized at the shank, torqued, torque marked.

Frames coated from front to back in Steel it Coatings making it 100% ready to weld onto at any point.

Bolt On Tubed Front Bumper,
w/ Three Piece Skid Plate

Bolt On Tubed Rear Bumper
W/ High Clearance Hitch
& Tow Harness

Bolt On Bed Cage

Bolt On Swing Out Tire Gate
Tied into Rear Bumper w/ Poly Bushings
Tied into Bed Cage w/ Heimed Reinforcement Links 1” inch .120 wall Sleeved w/ 1 1/4” .120 wall Tubing.

Bolt On Bedside Tubed Skeleton Mounts w/ Poly Bushings, Billet Washers & Rubber Isolators.

Bolt On Flush Mounted
Trunk/Storage Compartment

Bolt On Laser Cut Steel Milwaukee
Packout Mounting Base w/ Two Packout Cases, Includes Spare Hardware, Tools, & Jack Extension.

_____________________________________

Motor:
K&N Cold Air Intake
Solid Motor & Trans Mounts w/ Urethane Bushings
Wide Open Motor
Doug Thorley Long Tube Headers
Gutted Y Pipe
URD Upgraded Gaskets
URD O2 Simulator
Aero Exhaust Resonator
Dumped at a 45 before the axle
Custom Beveled Tip
Exhaust is fully Cerakoted in Gold from Headers to the Tail Pipe.
Solid Mounted RuffStuff Specialties
Battery Cradle Welded To Core Support

Auxiliary Fuse & Relay Box

Aluminum Wiper Fluid Reservoir

Aluminum Coolant OverFlow Reservoir


Lighting/Electronics:
360 Degree Lighting.
10x KC Dual Flex Led Pods.
- Upper Angled Ditch Pods
- Lower Front Fogs
- Under Cab Side Facing
- Upper Rear Angled Pods
- Lower Rear Facing Reverse Pods
8x Led Rock Lights (Work Lights)
- Mounted in each wheel well, either underside of the cab, w/ 1 under the hood & 1 over the axle.

Led Rear Chase Bar

6 Gang Switch Panel

Fiber Optic Starlight Headliner

PA System

Android HeadUnit

_____________________________________

Exterior:
‘12-‘15 Front End Conversion
Fiberwerx Front Fenders w/ Filler Caps
Fiberwerx Flush Molded Rear Bedsides
w/ Polished Aluminum Cup Holders
Paint Matched w/ Inner
Bed-liner Reinforcement

Interior:
Custom Retrofitted Seats
W/ Water Gel Memory Foam
Welded onto Factory Seat Brackets

Passenger Side Equipped Molle Panel

NRG Quick Release Steering Hub
OMP Steering Wheel
Kibbetech Steering Bezel
Carbon Fiber Switch Mount Bracket
2x Blank Black Anodized Aluminum Switches (PTT & Horn Provision)

Custom Signature Aluminum AR Handguard Shifter with a Magpul AFG built by me. (Have built a handful & have shipped them around the world.)

Desert Squadron Trauma Kit
- W/ A Tig Welded Quick Release Mount

Bed:
On Board 2 Ton Aluminum Jack
W/ Custom Quick Release Mounts

On Board Milwaukee Packout Case
Complete w/ Tools, Milwaukee M18 Impact, Driver, Drill, Grinder, Light, Milwaukee Bits, Spare Hardware, Jack Extension, Impact Sockets, Spare Parts & Hardware

On Board Trunk/ Storage Provision

On Board 2x LC2 5 Gallon Dump Cans

I purpose built & tastefully tailored every detail to suit my intentions of having a capable, versatile, & modular performing platform with full amenities & creature comforts. With my preference & specifications subject to a full usable bed, A/C, & powered windows while maintaining a balance of form & function with a focus on simplicity, forward planning & engineering of provisions for ease of future servicing, with tastefully executed aesthetics. Not a show truck by any means, as I use it for its purpose & has been my choice in a daily driver for the past 10 years. This platform has served me well & does everything I intended for it to do. The truck has only seen my hands in its entirety, from fabrication, wiring, retrofitting, paint, & all custom work to maintenance & regular servicing. All the fabrication work minus prefabbed parts has been built & completed by me throughout the entire truck. I built everything on the truck to be 100 Percent Bolt On for ease of servicing & future maintenance, with isolators on bolt on points throughout the truck utilizing polyurethane or neoprene where appropriate to minimize force & vibration.
Every critical mechanical bolt has been anti seized at the shank, thread locked, torque & paint marked on a regular basis with routine prep. I have driven the truck 2500 miles from Southern California to Tennessee on 34 hours of idle time with zero shutoff even at fuel stops, & back for a total of 5000+ Miles including the two weeks spent out there with zero mechanical issues or failures. This truck is proven, tried, & true, has gone cross country & back, seen a handful of road miles on the highways & roads, along with plenty of dirt and sand miles exploring the hills, desert, & dunes of Southern Ca.

I will begin to go through the truck within the next few weeks to perform routine service, inspection, & a full prep. I will happily work something out should anyone be interested in taking it as is & go through it themselves. Should I decide to replace some cosmetics & redo some things I’ve had in mind & fully clean it up, the price will be subject to change.

$35k.

Call or Text:
1(949)878-2995


.
    Pre-Runners   Listing #209402   Posted: May 25 Expires: Jul 04