More listings by Jason Heard

This tube chassis platform is designed around the 2020 TurboS 4 Seat platform, all the drivetrain, steering rack, cooling, and electrical will fit into this chassis from a donor TurboS. It was initially designed for a 3-seat platform but will fit 4 seats if desired, the rear spare tire setup is designed for up to 35” vertical spares with a custom cell between them.

Chassis – Main structure is 1.75” by .095 wall DOM With 1.5” by .095 wall sup structure. Nothing in the chassis is stock, its 100% new, designed in CAD and built on the chassis table at Master Fabrication. MIG welded with 70 series wire. Chassis tubes are fully welded, platework is partially welded with some items tack welded in place like the shock mounts. Comes with shock mounts, some drivetrain mounts, suspension mounts, and sway bar mounts for the rear. The prep-carts that the car is sitting on are also included in the sale.

Front Suspension – The front end is designed for race pace and abuse, all 4130 and TIG welded with modified geometry (uprights). The trackwidth will be about 78+ with standard high offset race beadlocks, designed around the Innov8 race wheels. The uprights utilize machine housings with 7/8 bearing spuds for upper and lower arms that accept stock TurboS shafts and hubs/brakes. The steering is setup for the Shock Therapy rack with 4130 tie rods with rod ends.

Rear Suspension – The rear uses the same upright main body, TurboS hubs/brakes/shafts, and has integrated third link for the rear to control the toe curve. The geometry is updated to fix the issues with the stock TurboS platform, so it has 4 links per side. The components are Tig welded 4130 with machined bearing ends for the links and adjustable rods end setup.