!For Sale!
1993 Ford Ranger XLT Xtra Cab
Clean CA Title
Current Registration CA Plated

I purchased this truck bone stock in 2014 with the purpose of building a prerunner. I have extensive photos of the build over the years.
Truck was finished in 2018. It is sorted and has about 2500 miles on it total.
Truck is turnkey ready to go to the desert today.

Details

Chassis:
Built by Eddie Thorogood “ED FAB Designs”
2” cage with 1-3/4” lacing front to rear.
Factory Frame Rails cut at back of cab Boxed and plated
Full Tube Back Half
Rear “Trunk” area Houses battery’s oil cooler filters spare parts bags, Maxima Fluid Holders and floor jack
Spare tire mounted on trunk lid on gas struts and heims
Detailed aluminum panel work by “Elite Alloy”
In closing back half and Airscoop for coolers
Rear 1/4” skid plate
Full Chassis Coated in Epoxy Primer and 3 Coats of Black Paint.
All components that unbolt have been powder coated.
Stainless Steel Braklines and fittings
All Nylon Braided Fluid Lines and AN Fittings for plumbing.

Front suspension:
Threat Motorsports D44 Equal Length Beams Dual swing set steering
Dana 44 5x5.5” front hub with 12” drilled and slotted rotors
Fox Shocks Package
14” x 2.5” coilover with DSC Adjusters
14” x 3.5” 5 tube bypass
2.5” x 2” bump stops
Dirt Bags Coil Wraps

Rear suspension:
Giant Motorsports 55” Canoe Links
4” Camburg fully Fabricated 9” axle housing
2.5” Camburg 5x5.5” race hubs
14” Rotors
Wilwood 6 piston Calipers
9” Strange nodular third member 6.00 gear setup by Evan Wellar racing
40 spline axle shafts
Camburg 9” Skid Plate
BMS Aluminum Sway Bar
Fox Shocks Package
14” x 2.5” coilover with DSC Adjusters
16” x 3.5” 5 tube bypass
2.5” x 4” bump stops
Dirt Bags Coil Wraps

Drivetrain:
Ford 4.0 L V6 OHV
JBA Long Tube Headers
Magnaflow Race Muffler
Custom UMP 4” Air Cleaner Intake
Culhane C4 with proprietary Bell housing and fixed yoke tail housing Fresh. 400 miles on it.
BTE Deep Extra Capacity Trans Pan
BTE 2800 rpm stall converter
Ron Davis dual pass front radiator with 16” Spal fan and custom Shroud. Fan is on tstat sensor
Dual PWR dual pass trans cooler with dual 12” fans
PWR oil cooler with 10” fans
Remote large capacity Oil & Trans Filters
Howe Coolant overflow catch can
PWR overflow Trans Catch Can
JAZ 32 gallon Fuel Cell with Rollover Valve Plumbing
Bosch 044 pump
Aeromotive Pre and Post Filters
Aeromotive Fuel Regulator with Return plumbed back to fuel Cell

Electrical:
Truck has complete Professional Milspec Race Wire harnesses front to rear by “Mark the Wire Guy”
Diagrams and Spec Sheets included
Sealed Toggle Switches and Push to Reset breakers
Blue Sea Systems fuse panel, battery switch and relays
Optima Yellow Top AGM battery’s
Armada Engineering Battery Boxes

Lighting:
4- Baja Designs LP6 Amber on removable front light Bar
10- Rock / work Lights KC Cyclones white
2 - interior Rigid Dome Lights
Cutless Designs Billet 3rd Brake Light with 2 white and 1 red Baja Designs S2 lights
1- Baja Designs Amber S1 dust/ chase light
2- Buggy Whip 2’ Amber Whips Threaded Base
Removable Fold Down Radius Light Rack for behind the Cab
Working Head Lights , Taillights , Reverse Lights , Brake Lights Turn signals and Parking lights

Interior:
2” .120 wall DOM Main Cage with 1-3/4” and 1-1/2” lacing
Mastercraft 3G seats on easy remove custom bases
Crow 3” Padded harnesses
Fiberwerx Mid Size Navi Dash Covered in Leather
OEM door Panels with matching Upholstery
Custom Aluminum Center console with cup Holders and phone pocket
Upholstery work By Friendly Upholstery
Full Set of Auto Meter Gauges
11” iPad Mount used for music & Lead Nav
Lowrance GPS on Passenger Side
Icon Race Radio programmed by PCI
PCI Intercom 4 Link and Brand New Headsets
Power Mirrors
Power Windows
Power Door Locks
Dual USB Charging in Dash
Heat shield, sound deadening, & New factory carpet
CNC Rear Handbrake
Tilt Steering Column
Momo Suede Steering Wheel
Sweet MFG quick Disconnect
Axis Metals Headset Mount
Axis Metals Rear View Mirror

Exterior:
McNeil Fiberglass Hood, Fenders and Bedsides
5- 17” OG Robby Gordon wheels Beadlocks
Yokahama Geolander MT 35” tires
PRP Spare Tire Bag
Speed Strap Y tire strap

Specs:
125” wheel base
86” track width
20” front travel
28” rear travel

Parts Not installed Can Convey With Sale
- 2” Cutless Designs KC Tube Clamp Light
- Camburg 2.25” 5x5.5 front hubs and Snouts
- Howe Power Steering reservoir with filter
- Aeromotive A1000 fuel pump
- Spare torque Converter
- Spare flex plate
- Spare Starter
- Misc Maintenance parts Seals, bearings, hoses, fittings etc.