Playtech Truggy
Front:
upper billet J-arms & lower boxed arms
RBP hubs, 2.0 howel steering
King race series 3.0 Coilovers 3.5 5 tube bypass
Rear:
Eversen Fab rear housing with EWR 10” 514 ratio 40 spline axles with Cone hubs.
Kings race series 3.0 coilsovers 4.0 king Kong’s bypass.
Motor Lq9 6.0, T400 Culhane trans,37” Toyo’s, 35 gallon fuel cell, oil & trans coolers. All chromoly car powder coated satin black. **Has Arizona license plate** call for more info Jon 408-489-1803
$77k OBO

Don't miss out on this incredible opportunity!
Brand new FiberGlass JL 59’’ Hood, 59’’ Grill and Cowl finished in Gloss Black.
Aluminum panels (Sides and rear), built by Letzroll offroad in Mesa-Arizona

Engine:
Thompson Mototrsports 376 LS
Hyperuetetic Flat Top pistons 4.030’’
Moly Rings
Blueprints GM 6.0 Gen III LQ9
GM Floated connecting Rods
GM Crankshaft polished, chamfered and balanced.
King Racing Main bearings
Upgraded Cam Bearings
Melling oil pump
GM III 24X
Thompsons Motorsports Lifters set LS7 style HP lifters
Texas Speed 588 Cam
Texas Speed Rods
Texas Speed LS2 timing set
LS6 intake 102mm Throttle body
600 HP on 100 Octan tune
Stock ECM
Custom Headers into dual exhaust
Griffin Race radiator, dual Fan
Oil radiator with fan
Steering radiator
Transmission radiator with fan
New dlc connector
New Alternator
New Injectors
New injectors seals
New Optima (Yello top) battery
New Spark plugs
New Mobil Oil and filter
New Jaz Tank
New Fuel pump
New Fuel line
New fuel filter
Transmission:
New TH350 BUILT by Zero Gravity
Side winder shifter
Cheetah valve body
No compression braking
Full manual
All roller bearing (No bushings)
Every upgrade internal possible (Sprags, cluthes,
drum)
TCI Billet 2800 Stall convertor
Summit Racing Dipstick and catch can
Transfer case:
New Rebuild Advance adapters 3.8 Gear ratio-125102
Front Axel and suspension:
New Trail Gear 9’’ Housing
3/8 x 3.5’’ tube
New Gear Works HP 10’’
New Spool 35 Spline
New 1350 yoke
New RCV-custom shafts 300M
35 Spline inner and outer
5:13 Gears
Solid industries knuckles with 6 bolt Chevy spindle
pattern
6 lug Yukon dana 60 forged hubs (machined to accept
trail gear hats)
New PSC SR 1480R
New Extra capacity remote fluid reservoir, 8.75’’ tall-
6/-12-SR-VT
New PSC SC2213-2.5’’ x 10’’ stroke double ended
Steering cylinder (Capability of 50 d) w/4 clamps- 7075
steering links.
CBR pump
New Arizona Driveline, custom H/D drive shaft
New MOJAB doubled limit straps.
14’’ 2.5 ADS Coilovers with Resi’s
14’’ 2.5 ADS Bypasses with Piggy backs
ADS bump
Willwood forged Dynalite Calipers
New Aeroquipe Brake line and fittings
Rear Axel and suspension:
Ruff Stuff JRAT 69 capable of flipping high or low
pinion,
New Artec 9’’ Backbone truss
New RockJock universal Antirock Kit-36 inch x .750
diameter Bar-20 inch Steel Arms 7075 sway bar link
Yukon Forged Spindles and Hubs
Dutchman 35 spline Chromoly double spline shafts
New Willwood forged Dynalite Caliper and pads
New Aeroquipe brake line and fittings
Trail gear hats and 14’’ rotors
New Youkon flanges and spindle bearings
Youkon 35 spline spool
5:13 Gears
New Arizona Driveline, custom H/D drive shaft
16’’ 2.5 ADS Coilovers with Resi’s
16’’ 2.5 ADS Bypasses with Piggy backs
ADS bump
Lights:
New Nacho LED TM5
New Nacho LED harness
New chase light
2 LED light bar up front
1 Led light bar on front bumper
Winch and Recovery:
New Warn winch with MOJAB synthetic rope
New MOJAB winch shackle
New MOJAB Hydraulic jack
New MOJAB H/D recovery kit
Interior:
New PRP Alfa seats
New PRP 5 points Harness
New Tachometer on dashboard
All aluminum panels.
New Quick connect steering wheels
PCI Coms
PCI Dual Air pump
5 lb fire extinguisher
Analog gages
Tire and wheels
40’’ Nitto KOH Spec, 20 miles on them with Brand new
spare
17’’ Vision Beadlocks
The car comes with spare drive shafts and so many
other spare parts.
That’s pretty close to everything . Please ask if you
have any questions.

Front end

Solo 4.5” over beams
Napa blue ball joints
Warn manual hubs
Threat swing steer
1.5” .250 tie rods
3.0x14” king coil overs with 2.5 x 2.5 king bumps
4.88 gears
3 sol teks on front bumper
Mcneil front fenders
Fiberglass hood


Interior

Custom cab cage All 1 3/4 DOM
Custom aluminum center console with rugged race radio, intercom, switch panel, gated shifter, usb ports, cupholders
Rugged bronco/OBS antenna mount
Lowrance HDS7 mounted on v bars
3 bucket seats
PRP harnesses
PCI carbonfiber headsets
Dual Cutless design KC cyclone for dome lights
dynamat all inside inside on floor and roof
Full carpet
Dual optimas red top batteries mounted inside


Rear suspension

Short course linked
All 2” .250 wall links
3.0 18” sway a way coil over
2.5 x 4” King bumpstop
Schreiner full floater rear end 4.88 gears willwood calipers
Hanneman rear fenders


Drivetrain

Stock 302 motor that was resealed and had a 6liter tune done on it (spark plus, spark plug wires, cap & rotor, MSD coil)
K&N air cleaner
Headers
200 amp alternator
Stock trans with winter shifter
Manual shift t case
Trans cooler in the front bumper
New driveshafts
Solo motor mounts
Autofab trans mount
5 17” vision bead locks with 37” BFG ko2

Misc.
Rugged third brake light with KC Cyclones
Had the vehicle wrapped 3 weeks ago
All new headlights and mirrors
Ohhco fab master cylinder relocation kit




Basically every part on on the bronco has been gone threw with the build everything is fresh has only been taken out to KOH for one weekend

One of the cleanest, best assembled, indestructible, sand cars ever made, bar none!! Just too clean for me, and need to make room in the garage for the new Kibbetech trophy truck on the way! Check out S&S on Instagram they have tons of professional pics! Perfectly maintained and completely babied! Ready to dune problem free for years to come! Full set of method wheels and 37 inch BFGs brand new included! Absolutely priced to move and firm!

Tested and ready to race. Center mount, new 700hp 416 LSX (BMS Racing Engines), built 400 turbo (new), suspension dial 3.5 and 4.0, King and Fox shocks, many spare racing parts. Pink slip in hand. Call Bill for more info and for appointment. Vehicle located in Fountain Valley, CA at Black Widow Exhaust (www.blackwidowexhaust.com).

6.7L Diesel
Fuel Forged 22’
Stryker 4.5” lift
Fox 2.5 front & rear
Bed rug
Retractable Pro bed cover
Custom sound
HD front & rear bumpers
Front light bar, fog lights, rear fog lights
Stinger Custom Radar detection/Laser jamming

The most winning Herbst-Smith spec truck
2020 herbst smith fab truck
Available after king of hammers
Has won

2023 - 1st in 6100 at Transaxle Engineering Challenge - 1st Overall

2023 - 1st in 6100 at The Mint 400 - 5th Overall

2023 - 1st in 6100 at King of the Hammers - 2nd Overall

2022 - 1st in 6100 at California 300 - 1st Overall

2022 - 2nd King Of The Hammers

2021 Best in the Desert Championship

2021 - 1st in 6100 at Cal City Desert Challenge - 1st Overall

2021 - 1st in 6100 at Vegas to Reno - 2nd Overall

2021 - 1st in 6100 at King of the Hammers - 4th Overall

2021 - 1st in 6100 at Parker 425 - 5th Overall

2020 - 1st in 6100 at Battle at Primm - 3rd Overall

2020 - 1st in 6100 at PCI 300 - 2nd Overall

Call for any questions

92 hours, 853 miles

Spare Front and Rear axles in box

Foodrill Powder Coated Boxed Arms [$8000]

Shock Therapy aftermarket shock components and tuning [$3500]

Custom aftermarket cage

Rear and side view mirros

Lower doors

Dome lighting

Door pockets

Aftermarket trunk with 2 spare tires [6 total]

4 beadlock sand tires 32"

Rugged Race Radio

Parker Pumper system

Police/Fire siren with PA system

Aftermarket seats (orange)

Aftermarket steering wheel [orange]

0 hours since Oil/filter and front and rear differential service

All dealer receipts/service

I'm sure I'm missing something....

Thanks,

abc

949-three hundred-3472 ph/tx

1967 CJ6 with Custom powder coated 1 piece roll cage, frame, rocker steps and swinging Spare and jack gate. Chevy Ram Jet 502 crate engine with custom headers and dual 18" magnaflow mufflers. Dana 300 transfer case, 44 front diff and 60 rear diff with 456 gearing, and turbo 400 transmission with quicksilver 3 speed ratchet shifter. Extra trans cooler and intercooler fan. Pro-comp secondary gauges, original speedometer with ODO. Dual solid axle long travel suspension with sway bars and bump stops. 35" Wrangler A/T tires for the road, plus 20" wide rear paddle tires and front wedge tractor tires for sand, and vehicle cover included. All work done by professional off road shops or factory trained master techs. Work orders available upon request.